HP LaserJet 4200 and 4300 printers - Software Technical Reference Manual

does not affect the printer image because the duplexing unit is contained within the printer. To print on both sides, click
Print from the program, click the Properties button, click the Finishing tab, and then click Print on Both Sides.
Mopier enabled
A mopier is an HP-designed printer that produces multiple, collated copies from a single print job. Multiple-original
printing (mopying) increases printer performance and reduces network traffic by sending the job to the printer once,
then storing it on the hard disk. The remainder of the copies are printed at the printer's fastest speed. All documents
can be created, controlled, managed, and finished from the desktop, which eliminates the extra step of using a
photocopier.
The HP LaserJet 4200 and 4300 series printers support the Transmit Once mopying feature. The Mopier Enabled
option is selected by default, if a hard disk is installed and Printer Hard Disk is selected in the driver software.
Envelope feeder
This check box should be selected if an envelope feeder unit is installed on the printer. Selecting the Envelope
Feeder option causes the envelope feeder bitmap to be superimposed on the printer's bitmap image.
When the Envelope Feeder check box is selected, the choice of Envelope Feeder is added to the Paper tab Source
is dropdown menu. Its order in the list should directly follow Manual Feed.
Optional paper destinations
The Optional Paper Destinations drop-down menu contains the following options:
•
(None)
•
HP 500-Sheet Stacker
•
HP 500-Sheet Stapler/Stacker
If the 500-Sheet Stapler/Stacker is configured on the Configure tab, the Staple option is included on the Finishing
tab.
Optional paper sources
The Optional Paper Sources drop-down menu lists optional paper sources for the HP LaserJet 4200 and 4300 series
printers. The list of available paper sources varies, depending on your printer, its input accessories, and the printer
configuration settings on the Configure tab.
For the HP LaserJet 4200 and 4300 series printers, five optional paper sources are available. The settings in the
Optional Paper Sources drop-down menu are as followings:
•
(None) (the default setting for the HP LaserJet 4200 and 4300 and 4200n and 4300n models)
•
HP 500-Sheet & 1,500-sheet Input Tray
•
2 HP 500-Sheet Stackable Trays (the default setting for the HP LaserJet 4200tn and 4300tn, 4200dtn and
4300dtn, 4200dtns and 4300dtns, and 4200dtnsl and 4300dtnsl models)
•
HP 1,500-sheet Input Tray
•
HP 500-Sheet Stackable Tray
Other options
The Other Options group box contains a single More command button. Clicking the More button opens the More
Configuration Options dialog box.
Software Technical Reference Driver features 79