HP LaserJet 4200 and 4300 printers - Software Technical Reference Manual

NT Forms tab features
The NT Forms tab appears only in the Microsoft Windows NT 4.0, Windows 2000, and Windows XP operating
environments. The NT Forms tab (like the Configure tab) can be viewed only from the Properties window.
Figure 29: Driver NT Forms tab
Use the NT Forms tab to specify which media sizes and types are loaded in each of the available paper trays. This
constrains the choices available in the Size and Type lists on the Paper tab. This constraint prevents information
overload if you request unavailable sizes or types.
Available Trays is a drop-down menu that contains all the printer trays that are specified on the Configure tab. The
This Tray Contains/Size (Forms) drop-down menu contains a list of standard paper sizes the HP LaserJet 4200 and
4300 series printers support, as well as any custom forms that are defined in the Forms tab. The This Tray Contains/
Type drop-down menu lists all of the media types supported by the HP LaserJet 4200 and 4300 series printers. The
Clear All button removes all the size and type constraints on the Paper tab.
Configuring the trays
1
Select the appropriate tray from the Available Trays list.
2
Use the This Tray Contains/Size (Forms) drop-down menu to select the paper size (or form) that is loaded in
that tray.
3
Use the This Tray Contains/Type drop-down menu to select the paper type that is configured for the tray.
4
Repeat steps 1 through 3 for the remaining trays.
Software Technical Reference Driver features 83