HP LaserJet 4200 and 4300 series printer - Start Guide

English

9
1
Connect an interface cable. To connect the printer directly to a
computer: 1) Connect an IEEE 1284-compliant (size “B”) parallel cable
between the parallel port on the computer and the parallel port on the
printer. (Note: A parallel cable is not included.) 2) Snap the wire clips into
place to secure the cable at the printer.
To connect the printer to an Ethernet 10/100 Base-T network: Connect a
network cable between the HP Jetdirect print server and a port for the
network.
QRSTU:hëêëVL}d~FQ~%& )
<ÛÚÚÚ<U=]<ÊË@`kgÁE,Ï»LêëL},Ï»í,Ï
»í^ @8¾oÏ»LE'& L/KNFL(K

:êV<UB_UBB<kߨbd~FQ~)L
êë<aÝ Þßàáâãßäà<»åæ³êëí<