HP LaserJet 4200 and 4300 series printer - Start Guide
5
Remove the packing materials.
1)
Remove the shipping bag and any
orange tape from the front and back of the printer.
2)
Open the printer top
cover and remove the foam packing material inside.
3)
Remove the plastic
film from the control panel display.
4)
Open tray 1 and remove the orange sheet.
5)
Open tray 2 and remove
all orange tape and packing materials.
6)
Close both trays.
Note:
Save all
the packing material. You might need to repack the printer at a later date.
<= !>?%&<îïé.ðñ¥òÓÅ;óôõö'&<÷Ô
OPÏðñø,ùúûü¥ýü(&<þQÿ,3è
õ
)& ÷Ô<U Ʊ¢Ïðñóôõ*& ÷Ô<= Ʊ¢ÏðñÅ;óôõö
¥ýü+& ±¢@8d3ÐÅ;,¥ýüFé
:¥