HP LaserJet 4200 and 4300 series printer - Start Guide

English

547 mm

(21.5 inches)

1045 mm (41.1 inches)

412 mm

(16.2 inches)

HP LaserJet 4200/

4200n/4300/4300n

HP LaserJet 4200/4200n/4200tn/4200dtn/4200dtns/4200dtnsl

HP LaserJet 4300/4300n/4300tn/4300dtn/4300dtns/4300dtnsl

740 mm

(29.1 inches)

HP LaserJet 4200dtns/

4200dtnsl

HP LaserJet 4300dtns/

4300dtnsl

HP LaserJet 4200tn/

4200dtn/4200dtns/4300tn/

4300dtn

1045 mm (41.1 inches)

670 mm

(26.4 inches)

WARNING! The printer is heavy. To prevent physical injury, two people

should lift and move the printer.

Prepare the location. Place the printer in a well-ventilated room on a

sturdy, level surface. Allow space around the printer, including 2 inches

(50 mm) of space around the printer for ventilation.

Make sure that the location has an adequate power supply. Check the

voltage rating on your printer (located under the top cover). The power

supply will be either 110 to 127 Vac or 220 to 240 Vac, 50/60 Hz.

Regulate the environment. Do not place the printer in direct sunlight or

near chemicals. Make sure that the environment does not experience

abrupt changes in temperature or humidity.

• Temperature: 50° to 91° F (10° to 32.5° C)

• Relative humidity: 20 to 80%