HP LaserJet 4200 and 4300 series printer - Start Guide

English
STUV
Bahasa Indonesia
11 12
Install the control panel overlay (optional): 1) If necessary, remove the
overlay that is currently installed on the printer by inserting a thin, rigid
object such as a credit card under the top edge of the overlay and then
pulling up on the overlay until it comes off. 2) Place the overlay you want
onto the control panel and snap it into place.
Turn the printer power on. Turn the power switch to the on position (“|”)
and wait for the printer to warm up. If the printer automatically set your
language, go to step 14. If the printer did not set your language, go to step
13.
OP\J  Cf áo ÏDEò|
E>?@âv¸¹;R,
]}NãUJ; A
Ö
þR,;3ÅE oóiäR, µIåù>?
@
gf ];R,acP0,Qi oÖûô
&&'(<[ ]^ýá:Xûáæ ç ôb o
èé>?@ê
Î>?@Ã²½æ;ëì &X
µíîwu
Î>?@ï²½æ;ëì &Xµíî
wv
Memasang penutup panel kontrol (tambahan): 1) Kalau perlu,
lepaskan penutup yang terpasang pada printer dengan menyisipkan
obyek tipis and kokoh seperti kartu kredit di bawah sudut atas penutup lalu
tarik sampai terlepas. 2) Tempatkan penutup panel kontrol pada
tempatnya.
Mengaktifkan printer. Putar tombol daya pada posisi aktifk (“|”) lalu
tunggu printer melakukan pemanasan. Apabila printer secara otomatis
mengatur bahasa, ke langkah 14. Apabila tidak, ke langkah 13.