HP LaserJet 4200 and 4300 series printer - User Guide

40 2 Printing tasks ENWW
To select the stapler at the control panel
1 Press SELECT ( ) to open the menus.
2 Use U
P ARROW () or DOWN ARROW ( ) to scroll to CONFIGURE DEVICE, and then press
S
ELECT ().
3 Use U
P ARROW () or DOWN ARROW ( ) to scroll to OUTPUT SETUP, and then press SELECT
().
4 Use U
P ARROW () or DOWN ARROW ( ) to scroll to STAPLER/STACKER, and then press
S
ELECT ().
5 Use U
P ARROW () or DOWN ARROW ( ) to scroll to ONE, and then press SELECT ().
Note Selecting the stapler at the printer control panel changes the default setting to staple. It is possible
that all print jobs will be stapled.