HP LaserJet 1010 series printer Software Technical Reference
ii ENWW
Contents 1 Purpose 2 Software overview Printer configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 HP LaserJet 1010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 HP LaserJet 1012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 HP LaserJet 1015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Configuration Software configuration settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Windows 95, Windows 98 SE, Windows NT 4.0, and Windows Me . . . . . . . . . . . . . . . . Windows 2000 and Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mac OS 9.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mac OS X . . . . . . . . . . . . . . .
HP Toolbox communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Contents ENWW
1 Purpose This technical reference guide provides information about the HP LaserJet 1010 series printer software and troubleshooting tips. This reference is also presented in an electronic format to serve as a quick reference tool for Customer Care Center (CCC) agents, support engineers, system administrators, and second-level management information system (MIS) personnel.
Chapter 1 - Purpose ENWW
2 Software overview The HP LaserJet 1010 series printers deliver LaserJet printing through a direct (local) universal serial bus (USB) (or a parallel port on the HP LaserJet 1015). Network connections are supported for the 1012 and 1015 models only via HP Jetdirect devices.
Printer configurations The HP LaserJet 1010 series printers include the following configurations. HP LaserJet 1010 ! 12 ppm for letter-size paper, 12 ppm for A4-size paper ! First page out in less than 8 seconds ! 600 x 600 dpi with HP Resolution Enhancement technology (REt) ! 150-sheet enclosed input tray ! Priority input tray ! 8 MB RAM ! 2000-page print cartridge ! Host-based printing ! USB version 2.0 ! Windows 98SE, Me, 2000, and XP ! Mac OS 9.x ! Mac OS X v10.1 and v10.
Printer software components The following tables indicate which printer drivers are supported by each operating system. In the tables: T = Typical Installation A = Add Printer Installation W = Web Download HP LaserJet 1010 and 1012 Printer drivers (installation type) Win 95 Host-based driver (custom) Win 98 SE/Me Win NT 4.0 T Win 2000 Win XP-32 T T Mac Host-based driver (typical) Mac OS 9.
The HP LaserJet 1010 series printer software includes the following components. Windows software components Components Description Add/modify/remove utility Installs, adds components, or uninstalls software for the HP LaserJet 1010 series printer software based on the hardware it detects from the host computer (Windows 95 and NT 4.0). HP Toolbox Provides printer status, configuration, troubleshooting, and alert configuration for the HP LaserJet 1010 series printer.
Mac software The HP LaserJet 1010 series printers include the following software components for Apple Computer's Mac OS 9.x, Mac OS X v10.1, and Mac OS X v10.2 (Macintosh) operating systems.
Additional information about software features Printer driver only for Windows 95 and Windows NT 4.0 The HP LaserJet 1015 printer offers printer driver only support for Windows 95 and Windows NT 4.0. Note Because USB is not available for Windows 95 and Windows NT 4.0, HP LaserJet 1015 is required for these operating systems. To install printer software for Windows 95 and Windows NT 4.0 To install the printer software for Windows 95 and Windows NT 4.0, you must use the Add Printer Wizard.
Product comparison with HP LaserJet 1000, 1005, and 1200 series printers The following table highlights some of the differences in features among the HP LaserJet 1000 series printer, the HP LaserJet 1005 series printer, the HP LaserJet 1200 series printer, and the HP LaserJet 1010 series printers. Note Not all printers are available in all areas.
General features (continued) Feature HP LaserJet 1000 series HP LaserJet 1005 series (Europe and Asia only) HP LaserJet 1200 series HP LaserJet 1010 series Upgradability None None One DIMM slot for memory, fonts, and printer languages None Supported operating systems Windows 98 SE Windows Me Windows 2000 Windows XP (32bit) Windows 95 Windows 98 SE Windows Me Windows NT 4.0 Windows 2000 Windows XP (32bit) Windows 95 (printer driver only) Windows 98 SE Windows 2000 Windows Me Windows NT 4.
Print features (continued) Feature HP LaserJet 1000 series HP LaserJet 1005 series HP LaserJet 1200 series HP LaserJet 1010 series Paper path Enclosed, Cshaped horizontal main paper path Enclosed, Cshaped horizontal main paper path Enclosed, Cshaped horizontal main paper path Enclosed, C-shaped horizontal main paper path Straight-through horizontal optional paper path Straight-through horizontal optional paper path Straight-through horizontal optional paper path Width: 415 mm (16.3 in.
Chapter 2 - Software overview ENWW
3 Product requirements This section lists the supporting operating systems and configurations for the HP LaserJet 1010 series software, and the requirements needed to run the software on a network. Supported platforms For easy printer setup and access to the full range of printer features, HP strongly recommends that you install the software provided. Not all software is available in all languages. Install the software before setting up the printer. See the Readme for the latest software information.
Supported configurations Direct (local) connections The HP LaserJet 1010 series printer is connected directly to the host computer with Universal Serial Bus (USB) cable or a parallel (HP LaserJet 1015 only) cable. In this configuration, the printer is not shared; a single user has complete physical control over the printer. Most users are familiar with using peripherals that are directly connected to their computers. A user can gain access to all of the capabilities of the printer in this configuration.
System requirements for HP LaserJet 1010 series printer software For both direct and network connection, all of the computers that use the printer must meet the following minimum requirements as listed below. IBM-compatible computer with an available USB or parallel port (HP LaserJet 1015 only) and the following: Note ! Windows 95 (printer driver only, parallel connections only, HP LaserJet 1015 only): Pentium 90 MHz processor or faster and 32 MB or more of RAM ! Windows NT 4.
For Mac OS systems Any Macintosh computer using the HP LaserJet 1010 series software has the following minimum system requirements: Note ! Mac OS 9.1 and higher: PowerPC processor and 96 MB of RAM. ! Mac OS X v10.1 and v10.2: Power Mac G3, G4, iBook, or eMac and 128 MB or more of physical RAM. A built-in display or a display connected to Apple-supplied video card is required.
Requirements for network connection Requirements for end-user client computers The network computers that will be using the HP LaserJet 1010 series software need to meet the minimum system requirements listed in the previous section. Note Certain Novell NetWare configurations are not supported by the HP LaserJet 1010 software. Note Windows Terminal Server and Citrix MetaFrame should use the latest Windows 2000, Windows XP, or Windows 9X PCL drivers available from http://www.hp.com.
For Mac systems ! Note A cable for your type of network connection (not included). This cable is used to connect the HP Jetdirect print server to a network port. Peer-to-peer sharing may work but is not supported on Mac OS systems. HP Jetdirect print servers The following table shows the HP Jetdirect print servers that are supported by the HP LaserJet 1010 series printers.
4 Note Installing the HP LaserJet 1010 series software HP recommends installing the HP LaserJet 1010 series software before connecting the printer to the computer. Wait for the prompt to connect the printer. Overview of software installation This section provides information for installing the HP LaserJet 1010 series printing system software using Windows and Macintosh operating systems. See page 9 for a list of the operating systems supported by printer software.
Installation options for Windows To install the printer driver for Windows 95 To install the printer driver for Windows 95 and Windows NT 4.0, you must use the Add Printer Wizard. Note 1 Click Start, and then point to Settings. 2 Click Printers. 3 Double-click Add Printer. 4 Select local printer, and then click Next. Windows 95 does not support USB connections. You must use a parallel connection (HP LaserJet 1015 only) to use this operating system. 5 Click Have Disk, and then click Browse.
10 Double-click the WinNT folder. 11 Double-click the PCL 5e driver folder. 12 Click hp130025.inf to select the INF file. 13 Click Open. 14 In the Install from Disk dialog box, click OK. 15 Click Next. 16 Choose the printer name (this is optional), and the default printer options. Click Next. 17 Select whether the printer will be shared, and click Next. 18 Select Yes, print a test page, and click Finish to complete the driver installation.
Once you have completed the registration or if you did not choose to register the printer online, and a dialog box that describes the benefits of registering the printer appears, click OK to finish. 15 You must restart the computer for the configuration changes to be made to the HP LaserJet 1010 series printer to take effect. Click Yes to restart now, or click No to restart later. For Windows XP HP recommends installing the HP LaserJet 1010 series software before connecting the printer to the computer.
Windows installation text options (continued) Screen/Field Description Default Installation Notes Click this button to open the Printing System Late-breaking Readme file. N/A Printer Connection To connect the printer, select one of the following options: Connected directly to this computer ! ! Connected directly to this computer Connected via the network Back Click Back to return to the previous screen. N/A Next Click Next to continue to the next screen.
Windows installation text options (continued) Screen/Field Description Default Space Click this button to view the disk space requirements and available space for the selected features. N/A Click OK to return to the Setup Wizard. Back Click Back to return to the previous screen. N/A Next Click Next to continue to the next screen. N/A Cancel Click this button to cancel the installation process and display the Finish HP LaserJet 1010 Setup Interrupted screen.
Windows installation text options (continued) Screen/Field Description Default Back Click Back to return to the previous screen. N/A Cancel Click this button to cancel the installation process and display the Finish HP LaserJet 1010 Setup Interrupted screen. Click Finish to exit the Setup Wizard. Installing HP LaserJet 1010 status window This window displays the status of the installation process. This process may take several minutes.
Windows installation text options (continued) Screen/Field Description Default Back Click Back to return to the previous screen. N/A Next Click Next to continue to the next screen. N/A Cancel Click this button to cancel the installation process and display the Finish HP LaserJet 1010 Setup Interrupted screen. Click Finish to exit the Setup Wizard.
Windows installation text options (continued) Screen/Field Description Default Printer Location and Comment Enter a text description of the printer and location (optional). N/A Back Click Back to return to the previous screen. N/A Next Click Next to continue to the next screen. N/A Cancel Click this button to cancel the installation process and display the Finish HP LaserJet 1010 Setup Interrupted screen. Click Finish to exit the Setup Wizard.
Windows installation text options (continued) Screen/Field Description Default view documentation To view the documentation, select one of the following options: N/A ! ! ! support view user guide This option opens the online user guide. print user guide This option allows the user to print the user guide from an Adobe Acrobat PDF file. Note: Adobe Acrobat must be installed on the computer to use this feature. release notes This option displays the Printing system Late-breaking Readme file.
Installation log files (Windows systems) The main logging file (product monitoring file) for the HP LaserJet 1010 series installer is hplj1010.his. If multiple installs are attempted or completed, the older log files will be designated hplj1010.hi1 or .hi2, and so on. This file is located in the Windows or WinNT directory, depending on the operating system. The file contains a list of actions performed during the installation process.
Installation for Mac OS (Network or Direct) HP LaserJet 1010 series Mac OS 9.1 or later To install the software on a Mac computer running Mac OS 9.1 or higher, perform the following procedure: 1 Connect the HP LaserJet 1010 series printer to the computer. 2 Insert the printer software CD-ROM into your CD-ROM drive. 3 If the CD-ROM does not auto-launch, go to the desktop, and then double-click the HP LaserJet 1010 CD-ROM icon. 4 Double-click the HP LaserJet 1010 folder.
a USB: Go to step 11. b AppleTalk: Select the correct AppleTalk Zone. c TCP/IP: Select "hp ip printing" for connecting to your TCP/IP printer. 11 Select the printer name from the printer list. 12 Click Add.
Installation instructions for networked computers This section contains instructions for installing the HP LaserJet 1012 or 1015 printer software on network computers running Windows 95, 98, Me, NT 4.0, 2000, XP, or Mac OS 9.x, or OS X (version 10.1 or later). Note Each computer system must have the appropriate printer driver for the operating system installed. PCL 5e printer drivers can be shared between Windows 2000 and Windows XP operating systems and between Windows 95, Windows NT 4.
Network installation for Mac systems (HP LaserJet 1010 printer) To install the software on a Mac computer for a printer connected to a network through an HP Jetdirect print server, see page 39. Discovery process during installation During the HP LaserJet 1010 series software installation, the software searches for an HP LaserJet 1010 series printer on the network. If the HP Jetdirect print server does not have the supported firmware, the print server will not be detected during discovery.
Configuration for Windows sharing This section contains instructions for using Windows sharing to make the printer available to network users when the printer is directly connected to a computer. Note Peer-to-peer sharing is not available for Mac OS systems. Once the printer is shared, install the printer drivers on all the computers you want to print to the printer. For Windows 95, 98, Me, NT 4.0, 2000, or XP, perform the following procedure to enable sharing.
Installing the printer driver only Windows Note If the printer is directly connected to another user’s computer, the printer must be shared from that computer using Windows sharing. To install the printer driver, perform the following procedure: 1 From the Start menu, click Settings, and then click Printers. 2 Double-click Add Printer, and then click Next. 3 When asked if the printer is a local or network printer, select Network Printer, and then click Next.
Installing the customization utility To install the customization utility, perform one of the following procedures: Procedure 1 1 If the Welcome screen does not open, click Start on the Windows task bar. 2 Click Run. 3 Type Z:\hpsetup (where Z is your CD-ROM drive letter). 4 Click OK. Procedure 2 Note 1 Quit all programs. 2 Place the HP LaserJet 1010 series printer software CD-ROM into the CD-ROM drive. 3 Wait for autorun to begin the software installation.
5 Configuration Software configuration settings Software configuration settings, such as sharing properties and port management, apply to the printer in general. To alter software configuration settings after installation, you must gain access to the printer properties by opening the printer driver. Follow these steps to access configurations settings: Windows 95, Windows 98 SE, Windows NT 4.0, and Windows Me 1 Click Start, select Settings, and then click Printers.
Mac OS X In the application you wish to print from, use the following steps to configure the HP LaserJet 1010 series printer settings: 1 Click File, and then click Print. 2 Using the drop-down list, select the printing options to configure and make changes to the print settings. 3 To use these settings for the current job only, after making printing option selections, click Print.
Printing preferences Printing preferences are a subset of the software configuration settings. These settings control specific instructions for each print job such as media size and type, resolution, and watermarks. You can gain access to printing preferences through the software application you are using or through the printer driver. Gaining access to printing preferences through the current software application This changes the settings only for the current software application.
Host-based printing preference tabs in Windows 98 SE, Me, 2000, and XP The following tabs are available in the Printing Properties: ! Finishing ! Effects ! Paper ! Basics Paper Field Description Default Quick Sets group Quick Sets This drop-down list displays a list of user-defined Untitled Quick Sets. This control also allows you to type a new Quick Sets name. Quick Sets allow you to save the current printer driver settings, such as page orientation, resolution, and paper source, for reuse.
Paper (continued) Field Description Default This drop-down list contains the following options: Letter Paper Options group Size is Letter Legal ! A4 ! Executive ! B5 (ISO) ! Envelope #10 ! Envelope Monarch ! Envelope C5 ! Envelope DL ! Envelope B5 ! A5 ! A6 ! B5 (JIS) ! Post Card (JIS) ! Double Post Card (JIS) ! 8.5 x 13 ! 16K Note: Paper sizes larger than what the printer supports (such as 11 x 17) are scaled to fit. ! ! Custom To open the Custom Paper Size window, click Custom.
Paper (continued) Field Description Default Type is This drop-down list contains a list of supported media. You can use this list to select the type of media you want to use. Plain This setting adjusts the printer speed and fuser temperature for the paper or other print media that you select. CAUTION: Using inappropriate media settings can cause damage to the printer.
Finishing tab Field Description Default This drop-down list displays a list of user-defined Quick Sets. This control also allows you to type a new Print Task Quick Set name. Type new Quick Set name here Quick Sets group Quick Sets Quick Sets allows you to save the current printer driver settings, such as page orientation, resolution, and paper source, for reuse. After choosing the settings, type a name for the quick set, and then click Save.
Finishing tab (continued) Field Description Default Pages per Sheet This drop-down list specifies the number of pages per 1 sheet to be printed on one sheet of paper. The supported selections are: 1 ! 2 ! 4 ! 6 ! 9 ! 16 Note: This feature is also known as N-up printing. ! Print Page Borders This control becomes available if Pages per Sheet is Unselected set for more than 1. Selecting this check box prints a border around each page on the sheet.
Effects tab Field Description Default Quick Sets group Quick Sets This drop-down list displays a list of user-defined Type new Quick Set Quick Sets. This control also allows you to type a new name here Print Task Quick Set name. Quick Sets allows you to save the current printer driver settings, such as page orientation, resolution, and paper source, for reuse. After choosing the settings, type a name for the quick set, and then click Save.
Effects tab (continued) Field Description Default % of Normal Size This control becomes available when Print Document On is clear. Available 100 This field allows you to specify the percentage of normal size that the printer will enlarge or reduce the document on the page. -Or Move the slider right or left to increase or decrease the percentage of normal size. Normal size refers to the document page size (check the application's page size settings).
Effects tab (continued) Field Description Default Message Angle This control consists of three options and a spin box: Angle (Windows 2000 and ! Diagonal: Selecting this option causes the Windows XP) selected watermark to print diagonally on the Diagonal page. (Windows 98 SE and ! Horizontal: Selecting this option causes the Windows Me) selected watermark to print horizontally on the page.
Basics tab Field Description Default Quick Sets group Quick Sets This drop-down list displays a list of user-defined Type new Quick Set Quick Sets. This control also allows you to type a new name here Quick Sets name. Quick Sets allows you to save the current printer driver settings, such as page orientation, resolution, and paper source, for reuse. After choosing the settings, type a name for the quick set, and then click Save. When you save Quick Sets, all current printer driver settings are saved.
Basics tab (continued) Field Description Default About... To view the About This Driver window, including copyright and software versions, click About. N/A Software Update To automatically open your browser and go to http:// www.hp.com, click Software Update. N/A OK To close the dialog box, click OK. N/A Help Clicking this button before closing the dialog box opens the online Help. N/A Cancel To close the dialog box without saving the changes you have made, click Cancel.
Printing preferences tabs using PCL 5e printer drivers in Windows 95, NT 4.0, 98, and Me The following tabs are available in the Properties dialog box (Document Defaults... in Windows NT 4.0): ! Finishing tab ! Effects tab ! Paper tab ! Basics tab Finishing tab Field Description Default Quick Sets group Quick Sets This drop-down list displays a list of user-defined Type new Quick Set Quick Sets. This control also allows you to type a new name here Print Task Quick Set name.
Finishing tab (continued) Field Description Pages per Sheet This drop-down list specifies the number of pages per 1 sheet to be printed on one sheet of paper. The supported selections are: ! ! ! ! ! ! Default 1 2 4 6 9 16 Note: This feature is also known as N-up printing. Print Page Borders This control becomes available if Pages per Sheet is Unselected set for more than 1. Selecting this check box prints a border around each page on the sheet.
Finishing tab (continued) Field Description Default Current Setting This read-only control denotes the quality setting currently applied to the printer. N/A This control consists of two options: Use HP MEt Graphic Settings group Complex Graphics ! ! Use HP MEt Use More Memory Note: The Use More Memory option is not intended for general use. Use it only if you receive printer memory error messages while printing complex pages.
Finishing tab (continued) Field Description Default Help Clicking this button before closing the dialog box opens the online Help. N/A Description Default This drop-down list displays a list of user-defined Quick Sets. This control also allows you to type a new Print Task Quick Set name. Type new Quick Set name here Effects tab Field Quick Sets group Quick Sets Quick Sets allows you to save the current printer driver settings, such as page orientation, resolution, and paper source, for reuse.
Effects tab (continued) Field Description Default Fit To Page group Print Document On Selecting this check box causes the document to be Unselected printed on a paper size other than the one for which it is formatted. When Print Document On is selected, a drop-down Letter list displays the types of media available.
Effects tab (continued) Field Description Default First Page Only This control box becomes available when text other Unavailable than (none) is shown in the Watermarks drop-down list. Selecting this check box enables the printer to print the specified watermark on only the first page of the document. No watermarks are printed on the second and subsequent pages. Edit Clicking this button opens the Watermark Details screen. N/A This control lists the available watermarks.
Effects tab (continued) Field Description Default Shading Clicking a setting from this drop-down list specifies how dark the selected watermark appears on the printed page. The supported shading options are: Very Light ! ! ! ! ! ! ! ! ! Lightest Very Light Light Medium Light Medium Medium Dark Dark Very Dark Darkest Size Use this spin box to specify the font size for the selected watermark.
Paper tab (continued) Field Description Default Delete To delete the selected Print Task Quick Set, click Delete. N/A This button becomes available for all Print Task Quick Set selections except Default Print Settings. All Pages group Size is This drop-down list allows you to select the paper Letter size for the document from the list of supported paper sizes, which includes saved custom paper sizes. Note: Varies by The paper size for all pages of a print job must be the country/region. same.
Paper tab (continued) Field Description Default Type is This drop-down list contains a list of supported media. Plain You can use this list to select the type of media you want to use. This setting adjusts the printer speed and fuser temperature for the paper or other print media that you select. CAUTION: Using inappropriate media settings can cause damage to the printer.
Paper tab (continued) Field Description Default Width Use this spin box to select the width of a custom paper size. 8.5 inches (if Size is set to Letter) If you enter a size that is too small or too large, the printer driver automatically adjusts the size for you. - Or - Use this spin box to select the length of a custom paper size. 11.0 inches (if Size is set to Letter) If you enter a size that is too small or too large, the printer driver automatically adjusts the size for you.
Basics tab (continued) Field Description Default Selecting this option enables the printer to print a page or envelope that is taller than it is wide when viewing the text right-side-up. Selected Orientation group Portrait Feed the paper as usual; the image is rotated on the page if necessary. Landscape Selecting this option enables the printer to print a page or envelope that is wider than it is tall when viewing the text right-side-up.
Printing preferences tabs using PCL 5e printer drivers in Windows 2000 and XP The following tabs are available in the Printing preferences: ! Advanced ! Paper/Quality ! Finishing ! Effects Advanced tab Field Description Default HP LaserJet 1010 PCL 5e Advanced Document Settings Paper Output group Paper Size Click Paper Size to display a drop-down list and select from the following options: Letter 11 x 17 16K ! 8.
Advanced tab (continued) Field Description Default Document Options group Advanced Printing Features Click Advanced Printing Features to display a drop- Enabled down list. Select either Enable or Disable. When this feature is enabled, Page Order, Booklet Printing, and Pages Per Sheet are available. If disabled, some of these options might not be available. Print Optimizations Click Print Optimization to display a drop-down list. Enabled Select either Enable or Disable.
Advanced tab (continued) Field Description Default Click Orientation to display a drop-down list. The following options are available: Portrait Layout Options group Orientation ! ! Portrait: Selecting this option enables the printer to print a page or envelope that is taller than it is wide when viewing the text right-side-up. Feed the paper as usual; the image is rotated on the page if necessary.
Paper/Quality tab (continued) Field Description Default Selecting this check box allows you to select a different page source and type settings for the following options: Unselected Paper Options group Use different paper First Page ! Other Pages ! Back Cover The paper size settings should be made within the application.
Paper/Quality tab (continued) Field Description Default Print Quality group Print quality field Use this drop-down list to select the print quality from 600 dpi the following options: Not available with PCL 5e printer driver in Windows ! 2000 and XP ! ! ! ProRes 1200 (141 lpi) ProRes 1200 (180 lpi) FastRes 1200 600 dpi EconoMode Selecting this check box allows the printer to use less Unselected toner on each page.
Finishing tab (continued) Field Description Default Document Options group Print On Both Sides (Manually) This setting allows you to print a document on both sides of a page. Note: This option is sometimes called "manual duplexing." The printer will print the first side of each page, then wait for you to put the paper back into the printer, and then print the second side of the page.
Finishing tab (continued) Field Description Default Help Clicking this button before closing the dialog box opens the online Help. N/A OK To update any changed settings on the printer and close the dialog box, click OK. N/A Cancel To close the dialog box without saving the changes you have made, click Cancel. N/A Apply Clicking this button applies the new settings, leaving N/A the dialog box open.
Effects tab (continued) Field Description Default Resizing Options group Print Document On Selecting this check box causes the document to be Unselected printed on a paper size other than the one for which it is formatted. When Print Document On is selected, a drop-down list displays the types of media available. The supported media types are: ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 16K 8.
Effects tab (continued) Field Description Default First Page Only This control box becomes available when text other Unavailable than (none) is shown in the Watermarks drop-down list. Selecting this check box enables the printer to print the specified watermark on only the first page of the document. No watermarks are printed on the second and subsequent pages. Edit Click Edit to open the Watermark Details screen. N/A This control lists the available watermarks.
Effects tab (continued) Field Description Default Shading Clicking a setting from this drop-down list specifies how dark the selected watermark appears on the printed page. The supported shading options are: Very Light ! ! ! ! ! ! ! ! ! Lightest Very Light Light Medium Light Medium Medium Dark Dark Very Dark Darkest Size Use this spin box to specify the font size for the selected watermark.
HP Toolbox Note The HP LaserJet 1010 series printers introduce with HP Toolbox 2.0. CAUTION To avoid HP Toolbox conflicts, when installing the HP LaserJet 1010 series printer on a system with an HP Color LaserJet 2500, install the HP Color LaserJet 2500 first, and then install the HP LaserJet 1010 series printer. The HP Toolbox is a Web application that you can use for the following tasks: ! Check the printer status. ! Configure the printer settings. ! View troubleshooting information.
2 The HP Toolbox opens in a Web browser. OR 1 Double-click the icon in the system tray. Viewing HP Toolbox using the system tray icon When viewing the HP Toolbox using the system tray icon, the following operations are available: Note ! If you double-click the icon when there is no alert, the browser opens the main page of HP Toolbox. ! If you double-click the icon when there is an existing alert, the browser opens the HP Toolbox current alerts page.
Troubleshooting tab The Troubleshooting tab provides links to these main pages: ! Problem Solving: Provides various printer troubleshooting information. Click the arrow buttons to scroll through steps to troubleshoot printing problems. ! Status Light Patterns: Provides illustrations and a table of status light conditions. ! Print Quality Tools: Enter Cleaning Mode.Click the arrow buttons to scroll through steps in Cleaning Mode.
Documentation tab The Documentation tab contains links to these information sources: ! User Guide. Contains the information about the printer usage, warranty, specifications, and support that you are currently reading. The user guide is available in both HTML and PDF format. ! Read Me. Contains late-breaking information about the printer, discovered after other documentation such as the user guide was developed. In English only.
Settings tab text options Item Description Default Device Information Group Device Description The printer name is displayed in the text box. Printer model Asset Number In the text box, type the asset number. N/A Company Name In the text box, type the company name. N/A Contact Person In the text box, type the name of contact person. N/A Apply To save any settings changed, click Apply. N/A Cancel To cancel any changes made, click Cancel.
Settings tab text options (continued) Item Description Apply To save any settings changed, click Apply. Cancel To cancel any changes made, click Cancel. Default Printing Group Copies In the text box, type the number of copies to print (1- 1 999). Wide A4 From the drop-down list, select either Yes or No. No Courier Font From the drop-down list, select either Regular or Dark. Regular Orientation To select the paper orientation, select either Portrait Portrait or Landscape.
Settings tab text options (continued) Item Description Default Symbol Set From the drop-down list, select from the following options: PC-8 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ENWW ARABIC8 GREEK8 DESKTOP LEGAL PC-1004 PC-8TK PS TEXT Roman-8 HPWARA HEBREW7 HEBREW8 ISO-11 ISO-15 ISO-17 ISO-21 ISO-4 ISO-6 ISO-60 ISO-69 ISOCYR ISOGRK ISOHEB ISO L1 ISO L2 ISO L5 ISO L6 MC TEXT PC-775 PC-8 PC-850 PC851GRK PC862HEB PC864ARA PC866CRY PC866UKA PC-8 DN PC8G
Settings tab text options (continued) Item Description Default Apply To save any settings changed, click Apply. N/A Cancel To cancel any changes made, click Cancel. N/A From the drop-down list, select from the following options: FastRes 1200 Print Quality group Resolution ! ! FastRres1200 600 RET From the drop-down list, select either On or Off. On Density From the drop-down list, select the density value (1= 3 Light; 5=Dark). Economode From the drop-down list, select either On or Off.
Settings tab text options (continued) Item Description Default Prepunched From the drop-down list, select from the following options: Plain ! ! ! ! ! ! Recycled Bond Card Stock (105-176 g/m2) Heavy (90-105 g/m2) Light (<75 g/m2) Plain Rough From the drop-down list, select from the following options: ! ! ! ! ! ! Plain Bond Card Stock (105-176 g/m2) Heavy (90-105 g/m2) Light (<75 g/m2) Plain Rough Restore Modes To restore the print modes, select the check box.
Settings tab text options (continued) Item Description Default Cleaning Mode To start the cleaning mode, click Start. N/A Resets To restore all advanced printer settings to the factory Unchecked defaults, select the check box and click Apply. Apply To save any settings changed, click Apply. N/A Cancel To cancel any changes made, click Cancel.
6 System changes through installation Installation changes to Windows systems The tables in the following sections detail the changes to the system as new folders and files are added when the HP LaserJet 1010 series software is installed on computers running Windows operating systems. Note This listing does not include files that are created, and then deleted, during the installation process.
Chapter 6 - System changes through installation ENWW
7 Uninstallation Uninstall in Windows 95 and Windows NT 4.0 To uninstall the software from Windows 95 and Windows NT, use the following method: Note 1 Click Start, click Settings, and then click Printers. 2 In the Printers window, right-click the printer icon, and click Delete. To uninstall the software from Windows NT 4.0, you must log on with administrator privileges.
Control panel method To uninstall using this method, click Start, select Settings, click Control Panel, and then doubleclick Add/Remove Programs (Add or Remove Programs in Windows XP). Select HP LaserJet 1010 series from the list of programs, and then click Remove. This starts the uninstallation program. Follow the instructions on the screen. When all the files are removed, you are prompted to restart the computer.
Scrubber Utility A scrubber utility is provided to remove files and entries that may not be properly handled by the uninstaller. The scrubber runs in the following operating systems: Windows 95, 98, Me, NT 4.0, 2000, and XP. The scrubber program ("scrubber.exe") is an ini file driven program. The ini file ("scrubber.ini") contains the specific information the scrubber executable needs in order to "scrub" any trace of a product from the PC.
4 Double-click the HP LaserJet Installer (Classic or OS X) for the appropriate OS. 5 Click Continue, click Accept, and then click Continue. 6 From the drop-down list, select UnInstall. 7 For OS X only, Print Center will auto-launch to give you the opportunity to delete the HP LaserJet 1010 print queue after uninstalling the software.
8 Software availability and fulfillment Ordering software To order the software if your CD-ROM is damaged or missing, contact Hewlett-Packard Support. Part numbers for the software CD-ROMs for the HP LaserJet 1010 series printers, and which languages are on them, are given in the table below. The CD-ROM Key refers to the software and documentation language sets included on the CD..
Languages The following tables detail the language options for the HP LaserJet 1010 series printers.
Welcome mats for HP LaserJet 1010 printers ENWW Languages included in the welcome mats Part number English French German Italian Spanish Dutch Portuguese Greek Q1336-90901 English Danish Finnish Norwegian Swedish Estonian Latvian Lithuanian Q1336-90902 English Polish Hungarian Czech Slovakian Slovenian Croatian Romanian Q1336-90903 English Russian Kazakh Ukrainian Bulgarian Turkish Hebrew Q1336-90904 English French Arabic Farsi Q1336-90905 English Bahasa Indonesian Traditional Chinese Korean T
Chapter 8 - Software availability and fulfillment ENWW
9 Port communication The HP LaserJet 1015 printer includes both an IEEE-1284 (parallel) port and a USB port. Note Do not connect the printer to the computer using both ports because printing results may be unpredictable and this configuration is not supported. Parallel port connections If you are connecting the HP LaserJet 1015 using the parallel port, then the computer must include a bidirectional data bus and cable. Ports are designated as enhanced capabilities port (ECP), IEEE-1284, or PS/2 qualify.
Changing parallel port modes This section provides the steps to make sure that the parallel port is configured to provide the best performance with the HP LaserJet 1015 printers. The mode for the parallel port determines how the parallel port performs with the HP LaserJet 1015 series printers. This mode can default to a number of different settings. Unfortunately, the HP LaserJet 1015 software cannot automatically select the best setting.
HP Toolbox and embedded Web server communication The HP Toolbox includes an embedded Web server to provide the Advanced Printer Settings functions of the HP Toolbox. An embedded Web server resides in the HP LaserJet 1010 series printers and the HP Toolbox communicates with this embedded Web server. The HP Toolbox is installed during the standard install process and runs in the Apache Tomcat Server (v. 4.03) and the Sun™ Java Runtime Environment (JRE) version 1.3.
Chapter 9 - Port communication ENWW
Appendix Late-breaking Readme file Printing System Late-breaking Readme for the HP LaserJet 1010 series printer *************************************************************** Late-breaking Readme Contents: I. Introduction - Operating Systems - Minimum System Requirements II. Software III Installation - Installation Overview - Installation Instructions - Installation Options IV. HP Toolbox Functions V. Known Issues VI. Technical Assistance VII.
- UNIX/Linux, DOS, OS2 For additional information on the printer features and driver features, refer to the online Help included with each software component and to the printer online user guide on the software CD. MINIMUM SYSTEM REQUIREMENTS - Windows 95: (print driver only) Pentium® 90 MHz with 16 MB RAM - Windows NT 4.0 (print driver only), Win 98, Win Me, Win 2000: Pentium® 166 MHz with 32 MB RAM - Windows XP: 233 MHz with 64 MB RAM - Macintosh operating system 9.
******************* III. INSTALLATION ******************* INSTALLATION OVERVIEW Hewlett-Packard recommends that you install the printer software before connecting the printer to your computer with a parallel or USB cable. INSTALLATION INSTRUCTIONS Windows 95 and Windows NT Only printer driver installation is supported on these operating systems. The HP toolbox software is not supported on these operating systems.
INSTALLATION OPTIONS JAVA Runtime Environment If the Java Runtime Environment (JRE) V1.3.1 is not found on your system during installation of the software on Windows 98, Windows 2000, or Windows XP, the JRE is installed in the HP toolbox 2.0 folder. The JRE does not have a separate installer. It can be removed only if HP toolbox is uninstalled. The JRE folder in the 'Toolbox2.0' folder (where the HP toolbox software is installed) can be removed and another version can be installed.
************************** IV. HP TOOLBOX FUNCTIONS ************************** The HP toolbox 2.0 software is available for Windows 98, Windows Me, Windows 2000, Windows XP, and Macintosh OS X (web only). HP toolbox contains the following functions: - check printer status - check consumables status - configure for printer status alerts - troubleshooting assistance and status light patterns help - user documentation for printer - other helpful external web links HP toolbox 2.
On Windows operating systems, Windows Networking (TCP/IP) must be enabled for HP toolbox to work properly. If MS PowerPoint color text prints as black text, uncheck the 'Grayscale' or 'Black & White' check box on the application's 'File\Print' dialog and reprint the document. (Uncheck the 'Grayscale' or 'Black & White' check box before printing each time.) HP recommends 'Software First' installation of the printer software on all Windows operating systems.
When text that is printed with the HP PCL 5e driver is not optimal, try one of the following, depending on your driver and operating system, and reprint your document: 1. To use the HP LaserJet PCL 5e print driver: a. Win 9x, Win Me, Win NT: Check the 'Send TrueType as Bitmaps' box on the 'Finishing\Print Quality Details' page in the driver's 'Printing Preferences' or 'Properties'. b.
*************************** VI. TECHNICAL ASSISTANCE *************************** OBTAINING ADDITIONAL INFORMATION FROM HP SERVICES See the flyer that shipped in the box with the product. OBTAINING INFORMATION VIA THE INTERNET HP provides technical assistance and support 24 hours a day, 7 days a week, at no charge. For updated HP printer software, product and support information, and printer drivers in several languages, use the following URLs to reach HP via the internet. HP LaserJet 1010: http://www.
LIMITATION OF LIABILITY. IN NO EVENT WILL HP OR HP SUPPLIERS BE RESPONSIBLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING LOSS OF USE OR LOSS OF DATA) OR OTHER DAMAGES ALLEGED TO BE CAUSED BY THE USE OF THIS SOFTWARE. U.S. GOVERNMENT RESTRICTED RIGHTS: The software and any accompanying documentation have been developed entirely at private expense. They are delivered and licensed as "commercial computer software" as defined in DFARS 252.227-7013 (Oct 1988), DFARS 252.
Appendix ENWW
Index Symbols *.INI and Windows registry changes 87 A Alerts tab 78 availability, software 93 C cables 15 capabilities, paper handling 16 cartridges, print 16 changes, *.
M Mac installation changes 87 software 13 software uninstall 91 systems installation options 36 Mac OS 9.x system requirements 22 Mac OS X 10.
T trademark notices 7 typical installation 25 U uninstall, manual 90 uninstallation 89 upgradability 16 USB port connections 98 user guides 94 using HP Jetdirect external print server 38 V view, HP toolbox 77 W welcome mats 95 Win.
Index ENWW
