HP PCL/PJL reference - PCL 5 Comparison Guide

ENWW Printer-Specific Differences 2-77
Output Bin Command
This command selects the destination bin into which the print job is
output when printed.
?&l#G
Note The Output Bin command is not recommended. Instead, it is
preferred that the PJL OUTBIN command be used to set the default
media destination.
# = 0 - Automatic selection
1 - Selects bin #1 (printer top/face-down bin)
2 - Selects bin #2 (printer left/face-up bin; this bin not
available when the High Capacity Output (HCO) is
attached)
3 - Selects bin #3 (HCO face up bin)
4 - Selects bin #4 (HCO #1 face down bin)
5 - Selects bin #5 (HCO #2 face down bin)
6 - Selects bin #6 (HCO #3 face down bin)
7 - Selects bin #7 (HCO #4 face down bin)
8 - Selects bin #8 (HCO #5 face down bin)
9 - Selects bin #9 (HCO #6 face down bin)
10 - Selects bin #10 (HCO #7 face down bin)
11 - Selects bin #11 (HCO #8 face down bin)
Default =0
Range = 0 to 11