HP Photosmart 140 series - (English) Reference Guide

hp photosmart 140 series
chapter 1
8
4 Place the new print cartridge in the print cartridge cradle with the copper
contacts facing toward the inside of the printer and the ink nozzles facing
down.
5 Push the print cartridge into the print cartridge cradle until you feel it snap
into place.
6 Close the print cartridge door.
After you install a new print cartridge, a message appears on the printer’s
LCD screen asking you to load plain paper in the paper tray and press the
OK button. When you press the OK button, the printer automatically
calibrates the new print cartridge and prints a calibration page to confirm
that the print cartridge is correctly installed and functioning properly.
remove the print cartridge
1 Open the print cartridge door.
2 Push down and pull outward on the top of the print cartridge to unsnap it
from the print cartridge cradle.
Copper contacts