HP Photosmart 148 Photo Printer Installation Guide (Chinese version)

Q3025-90184

hp photosmart 140 series

setup

guide

HP #57

plug in the power cord

Place the printer at least 10 inches (254 mm) away from any

obstruction to allow space for the paper to move through the

printer during printing.

1. Connect the power cord to the back of your printer.

2. Connect the adapter plug for your area to the power cord.

3. Plug the power cord into a working electrical outlet.

Important: Make sure the power cord does not block the rear

paper path.

Rear paper path

load an index card

Note: The index card will be used to print a calibration page in

step 6.

1. Open the paper tray door.

2. Place an index card from the sample pack on the paper tray

and slide the card underneath the output guide.

3. Move the paper width guide to fit close to the left edge of the

index card without bending the card.

Output guide

Paper width guide

Paper tray

Do not touch or remove

the ink nozzles or the

copper contacts!

remove the tape

1. Open the print cartridge package.

2. Pull the pink pull-tab to remove the clear tape from

the print cartridge.

*Q3025-90184*

PAGE 1
hp photosmart 140 series setup guide HP #57 2 plug in the power cord 3 2 Place the printer at least 10 inches (254 mm) away from any obstruction to allow space for the paper to move through the printer during printing. 1. Connect the power cord to the back of your printer. 2. Connect the adapter plug for your area to the power cord. 3. Plug the power cord into a working electrical outlet. Important: Make sure the power cord does not block the rear paper path.
PAGE 2
5 install the print cartridge 1. Open the print cartridge door. 2. Insert the HP #57 tri-color print cartridge into the print cartridge cradle with the copper contacts facing toward the inside of the printer and the ink nozzles facing down. 1 3. Push the print cartridge into the cradle until you feel it snap into place. 4. Close the print cartridge door. Print cartridge door 2 3 6 select your language On button need more help? 1. Press the ON button on the top of the printer. 2.