Quick start

12
装入 10x15 厘米（4x6 英寸）的照片纸
Load 10x15 cm (4x6 inch) photo paper
1. 抬起出纸盘。
2. 务必将照片纸盘滑片从打印机上拉开。
3. 拉出照片纸盘纸张长度导板，然后向左推照片纸盘纸张宽度导
板到最大限度。
4. 将最多 20 张 10x15 厘米（4x6 英寸）照片纸打印面朝下装入
照片纸盘。
5. 调整照片纸盘纸张长度导板和纸张宽度导板，使其紧靠纸张边
缘，并且保持纸张平展。
6. 朝打印机的背面推照片纸盘滑片，直到停住为止。照片纸盘从
照片纸盘窗口中消失。
7. 放下出纸盘。
1. Raise the Out tray.
2. Ensure that the photo tray slider is pulled away from the printer.
3. Pull out the Photo tray paper-length guide and slide the Photo
tray paper-width guide as far to the left as it will go.
4. Place up to 20 sheets of 10x15 cm (4x6 inch) photo paper in
the Photo tray so the side to be printed on faces down.
5. Adjust the Photo tray paper-length guide and paper-width guide
to fit close to the edges of the paper without bending the paper.
6. Push the Photo tray slider toward the back of the printer until it
stops. The Photo tray disappears from view in the Photo tray
window.
7. Lower the Out tray.
3
出纸盘
Out tray
纸张长度导板
Paper-length guide
纸张宽度导板
Paper-width guide
啮合的照片纸盘滑片
Photo tray slider engaged