Quick start

5
1. 抬起顶盖，向下推打印墨盒闩锁，然后向外拉。
2. 打开照片打印墨盒的包装，然后拉起粉色小片，撕掉透明胶带。
请勿触摸墨水喷嘴或铜色触点。
3. 拿住墨盒，使铜色触点先进入打印机。将墨盒推入金属棒下面
的底座左侧。推墨盒，直到卡入到位。
4. 向下推墨盒闩锁，直到锁住为止。
5. 重复上述过程，安装三色和灰色照片打印墨盒。
6. 放下顶盖。当打印机屏幕提示打印校准页时，请按控制面板上
的 OK 按钮。
* 将未使用的打印墨盒存放在此处。
您可以购买可选的黑白打印墨盒。要找到最适合打印作业的墨盒，
请查看本小册子封底。
1. Raise the top cover, then push down and pull out the print
cartridge latch.
2. Unwrap the Photo print cartridge, then pull the pink tab to
remove the clear tape. Do not touch the ink nozzles or copper-
colored contacts.
3. Hold the cartridge so the copper-colored contacts go into the
printer first. Slide the cartridge into the left side of the cradle
under the metal bar. Push the cartridge until it snaps into place.
4. Push down on the cartridge latch until it locks.
5. Repeat this process to install the Tri-color and Gray Photo print
cartridges.
6. Lower the top cover. Press OK on the control panel when the
printer screen prompts you to print an alignment page.
* Store any unused print cartridge here.
You can purchase an optional Black print cartridge. Check the
back cover of this booklet to find the best cartridges to use for your
print projects.
安装打印墨盒
Install the print cartridges
4
* 存放可选打印墨盒和保护器。
* Store the optional print cartridge and protector.