Quick start

安装 HP Photosmart 软件 (Windows)

Install the HP Photosmart software (Windows)

Windows

仅 Windows Windows only

仅 USB 安装

如果选择网络安装，请遵循《用户指南》的“网络”附录中的指示

操作。

重要：请勿在没有提示的情况下连接 USB 电缆。

典型安装可以提供查看、编辑、管理及共享图像的软件。仅当系统

内存或硬盘驱动器空间不足时才选择“最小”安装。

1. 将 HP Photosmart CD 插入计算机，然后遵循屏幕指示操作。如

果没出现指示，请查找并双击 CD 上的 setup.exe 文档。

注意：如果出现发现新硬件屏幕（如下所示），请单击取消，拔

下 USB 电缆，然后重新启动安装程序。

2. 选择 USB 连接类型

3. 出现提示后，请使用 USB 电缆连接打印机和计算机。复制文件

会占用几分钟，如果系统版本较旧，时间可能更长。

4. 出现“祝贺”屏幕后，请单击打印演示页。

注意：如果安装期间遇到问题，请参见第 8 页的疑难排除。

USB Installation Only

For Network installation, follow the instructions in the

Network appendix of the User’s Guide.

Important: Do not connect the USB cable until prompted.

The Typical installation provides software to view, edit, manage,

and share images. Only choose Minimum if you have limited

system memory or hard drive space.

1. Insert the HP Photosmart CD into the computer and follow the

onscreen instructions. If instructions do not appear, locate and

double-click the setup.exe file on the CD.

Note: If the Found New Hardware screen (shown below)

appears, click Cancel, unplug the USB cable, and restart the

installation.

2. Choose USB connection type.

3. When prompted, connect the printer to the computer with the

USB cable. It may take several minutes to copy files and

possibly longer on older systems.

4. When the Congratulations page appears, click Print a demo

page.

Note: If you experience problems during installation, see

Troubleshooting on page 8.

USB 连接

USB connection