Quick Guide

12
10x15cm(4x6 인치) 인화지 공급
Load 10x15 cm (4x6 inch) photo paper
1. 출력 용지함을 올립니다.
2. 사진 용지함 슬라이더를 프린터 바깥쪽으로 당기십시오.
3. 사진 용지함의 용지 길이 조정대를 바깥쪽으로 당겨 빼내고
사진 용지함의 용지 너비 조정대를 최대한 왼쪽으로 밉니다.
4. 10x15cm(4x6 인치) 인화지 20장을 인쇄면을 아래로 향하게
사진 용지함에 넣습니다.
5. 사진 용지함의 용지 길이 조정대와 용지 너비 조정대를 용지가
구부러지지 않게 용지의 가장자리에 맞춰 조정합니다.
6. 사진 용지함 슬라이더를 멈출 때까지 프린터 뒤쪽으로 밀어
넣습니다. 사진 용지함 창에서 사진 용지함 그림이
사라집니다.
7. 출력 용지함을 내립니다.
1. Raise the Out tray.
2. Ensure that the photo tray slider is pulled away from the printer.
3. Pull out the Photo tray paper-length guide and slide the Photo
tray paper-width guide as far to the left as it will go.
4. Place up to 20 sheets of 10x15 cm (4x6 inch) photo paper in
the Photo tray so the side to be printed on faces down.
5. Adjust the Photo tray paper-length guide and paper-width guide
to fit close to the edges of the paper without bending the paper.
6. Push the Photo tray slider toward the back of the printer until it
stops. The Photo tray disappears from view in the Photo tray
window.
7. Lower the Out tray.
3
출력 용지함
Out tray
용지 길이 조정대
Paper-length guide
용지 너비 조정대
Paper-width guide
연결된 사진 용지함 슬라이더
Photo tray slider engaged