HP LaserJet 9050 - Software Technical Reference (External)

mopier mode can be created, controlled, managed, and finished from the computer, which eliminates
the extra step of using a photocopier.
The HP LaserJet 9050 printer supports the transmit-once mopying feature when the product has an
installed hard disk or a minimum total memory of 48 MB, and the Mopier Enabled setting on the
Configure tab is on.
Mopier mode and collation
Mopying and collating print jobs are independent but closely related functions. Mopying, the ability to
send multiple original print jobs to the product , is performed by the print driver and the product .
Collating can be controlled by using either the print driver or the document software program. The
mopying mode is selected by default in the driver, and can be disabled by clearing the Mopier
Enabled selection on the Configure tab to disable the feature.
You can control collation through the print driver by selecting or clearing the Ignore Application
Collation check box on the More Configuration Options dialog box that appears when you click
the More... button on the Configure tab. You can clear the check box, which is available only when
the Mopier Enabled setting on the Configure tab is selected, to allow the software program to
control collation.
To receive uncollated multiple copies of a print job with the mopier enabled, you must clear the
Ignore Application Collation check box and make sure that the software program collation feature
is not selected.
The following table shows the relation between Mopier Enabled settings and collation settings in the
software program and the driver. The first three columns show the settings; the last column,
"Expected result", shows how a 3-page print job would appear.
Table 3-6 Driver Mopier mode and collation settings
Mopier Enabled
Application collation Ignore Application
Collation
Expected result
Not selected Not selected Not available 3 copies uncollated
Not selected Selected Not available 3 copies collated
Selected Not selected Not selected 3 copies uncollated
Selected Not selected Selected 3 copies uncollated
Selected Selected Not selected 3 copies collated by printer
Selected Selected Selected 3 copies collated by printer
Optional Paper Destinations
The Optional Paper Destinations drop-down menu lists optional output devices for the
HP LaserJet 9050 printer. The list of available destinations varies depending on your product , its
output accessories, and the product configuration settings on the Configure tab.
For the HP LaserJet 9050 printer, the following settings are available in the Optional Paper Sources
drop-down menu:
■ Not Installed This is the default setting for the HP LaserJet 9050 printer.
■ HP 3000-Sheet Stacker.
134 3 HP traditional print drivers for Windows
HP traditional print
drivers for Windows