HP LaserJet 9050 - Software Technical Reference (External)

Fonts
The Fonts group box contains a Font Card(s) check box and a corresponding Configure button.
Selecting the Font Card(s) check box tells the driver that a Font card is installed, and that stored
data about the fonts on the card is available. When the check box is selected, the Configure button
is enabled. Click the Configure button to open the Configure Font Card(s) dialog box. If the Font
Card(s) check box was not selected when you opened the More Configuration Options dialog box,
selecting that check box automatically opens the Configure Font Cards dialog box.
Figure 3-26 Configure Font Cards dialog box
Use the Configure Font Cards dialog box to perform the following tasks:
■ Add up to two font cards by clicking the Add button.
■ Specify a unique font-card name.
■ Select specific font card data files that contain lists of fonts on specified cards.
■ Select one or more installed cards in the Installed Font Cards list. The list to the right (Fonts)
shows all of the fonts that are available on the selected card(s).
■ Enable or disable one or more of the selected font(s).
Complete the following steps to configure a font card:
1 Make sure that the font card is installed correctly.
2 Click Add. The Add Font Card dialog box appears.
3 Click Browse. The Font Card Files dialog box appears.
HP traditional PCL 6 and PCL 5e driver features 137
HP traditional print
drivers for Windows