HP LaserJet 9050 - Software Technical Reference (External)

■ Top Secret
■ Urgent
■ Custom
■ Watermark (Pages per Sheet)
■ 1 (default)
■ >= 2
■ Watermark Font
■ Courier Bold
■ Times Bold
■ Helvetica Bold (default)
■ Watermark Size. Settings for the watermark size range from 24 points to 90 points. 48 points is
the default.
■ Watermark Angle. Settings for the watermark angle range from 90 degrees to -90 degrees in 15-
degree intervals. A 45-degree angle is the default.
■ Watermark Style
■ Narrow Outline
■ Medium Outline (default)
■ Wide Outline
■ Wide Halo Outline
■ Filled
■ Print Watermark
■ No (default)
■ All Pages
■ First Page Only
Job Storage tab features
The HP LaserJet 9050 printer lets you store print jobs in the product's memory for printing at a later
time. These job-storage features are described in the following sections.
The Job Storage tab appears among the driver tabs only if Job Storage is enabled. To support job-
storage features for complex jobs, or if you often print complex graphics, print postscript (.PS)
documents, or use many downloaded fonts, HP recommends that you install additional memory,
install a hard disk, or both. Added memory also gives you more flexibility in supporting job storage
features. A minimum total memory of 48 MB is required to use Job Storage features.
After a hard disk or additional memory is installed, the driver must be configured to reflect the
changes in the product.
148 3 HP traditional print drivers for Windows
HP traditional print
drivers for Windows