HP LaserJet 9050 - Software Technical Reference (External)

Bidirectional communication is not supported in Windows 98, Windows Me, or Windows NT 4.0, the
operating environments that support the PS Emulation Driver. The driver must therefore be updated
manually.
To configure the driver manually after installing a hard disk or additional memory, follow these steps:
1 Click Start, select Settings, and then click Printers.
2 Right-click the product name, click Properties, and then click the Device Settings tab.
3 If additional memory has been installed, select Printer Memory: under Installable Options, and
then select the option that matches the total amount of memory currently installed.
4 If a hard disk has been installed, select Printer Hard Disk: under Installable Options, and then
select Installed in the Change 'Printer Hard Disk' Setting dialog box that appears.
5 Click OK to make the printer hard disk and job-storage features available.
NOTE You can disable Job Storage while leaving the product hard disk enabled. To disable
Job Storage, click Start, select Settings, and then click Printers. Right-click the product
name, click Properties, click the Device Settings tab, select Job Storage:, and then select
Disabled in the Change 'Job Storage' Setting dialog box that appears. When Job Storage is
disabled, the Job Storage driver tab is not visible.
HP traditional Postscript 3 Emulation Driver features 149
HP traditional print
drivers for Windows