HP LaserJet 9050 - Software Technical Reference (External)

6 If a PIN number is assigned to the job, press the up and down buttons to select the first digit of
the PIN, and then press the S
ELECT button. The number in the product control-panel display
changes to an asterisk. Repeat this step for each of the remaining three digits of the PIN number.
If no PIN number is assigned to the job, continue with step 7.
-or-
7 Press the up and down buttons to select the number of copies to print.
8 Press the S
ELECT button to print the job.
Deleting a Job Storage print job
Sometimes it is necessary to delete a print job from the product hard disk. You can do this from the
product control panel.
1 Press the S
ELECT button (the one with the check mark) to open the menus. RETRIEVE JOB is
highlighted.
2 Press the S
ELECT button.
3 Press the up and down buttons to scroll to your User Name, and then press the S
ELECT button.
4 Press the up and down buttons to scroll to the Job Name, and then press the S
ELECT button.
5 Press the up and down buttons to select DELETE.
6 If a PIN number is assigned to the job, press the up and down buttons to select the first digit of
the PIN, and then press the S
ELECT button. The number in the product control-panel display
changes to an asterisk. Repeat this step for each of the remaining three digits of the PIN number.
If no PIN number is assigned to the job, continue with step 7.
-or-
7 Press the S
ELECT button to delete the job.
The stored print job is deleted and the product returns to the READY state.
Device Settings tab
NOTE The Device Settings tab is in the Properties for the print driver in Windows NT 4.0.
In Windows 98 and Windows Me, a tab with similar options and settings is called the Device
Options tab.
To gain access to the print driver Properties, click Start on the Window task bar, select
Settings, and then click Printers. Right-click the product name, and then click Properties.
HP traditional Postscript 3 Emulation Driver features 155
HP traditional print
drivers for Windows