HP LaserJet 9050 - Software Technical Reference (External)

The following illustration shows the Front Cover setting and options.
Figure 4-6 Front Cover options
The Front Cover options are as follows:
■ Size is: drop-down menu
■ Custom... button
to create custom paper sizes
■ Add a Blank or Preprinted Cover check box
■ Source is: drop-down menu
■ Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes made to the Size
is: setting here override any previous Size is: settings made in other Use Different Paper/Covers
options.
When you select Front Cover, you must also select the Add a Blank or Preprinted Cover check
box to enable the setting. When you select this check box, the Source is: and Type is: drop-down
menus become available and a check mark appears next to the Front Cover option.
The Source is: setting specifies the source tray to use for adding a front cover to the document. The
list of source trays depends on the printer accessories. Any optional media trays that are installed
through the Device Settings tab also appear here. For more information about the Source is:
setting, see the
Source Is section of this chapter.
180 4 HP PCL 6, HP PCL 5e, and HP PS emulation unidrivers for Windows
HP unidrivers for
Windows