HP LaserJet 9050 - Software Technical Reference (External)

Accessory Output Bin
This control specifies whether you have any accessory output devices installed on your product. The
available accessory output devices are:
■ HP 3000-Sheet Stapler/Stacker
■ HP 3000-Sheet Stacker
■ HP Multifunction Finisher
■ 8-Bin Mailbox — Mailbox Mode
■ 8-Bin Mailbox — Stacker Mode
■ 8-Bin Mailbox — Job Separator Mode
■ 8-Bin Mailbox — Sorter/Collator Mode
Duplex Unit (for 2-Sided Printing)
The HP LaserJet 9050dn, model printer comes with a duplex unit installed. This setting is enabled
(Installed) by default.
NOTE The HP LaserJet 9050 printer supports smart duplexing. The product uses the smart
duplexing feature to detect information on both sides of the print job pages and only runs the
pages through the duplexing unit if there is printable information on the second side of the
page.
Printer Memory
This option matches the setting to the amount of memory that is installed in the product. The driver
generates ranges of memory that can be selected, up to the maximum that the product can accept.
The driver can use this information to manage how the print driver uses the product memory.
When a minimum total memory of 48 MB is installed, the Stored Job option and the Mopier Mode
are enabled in the print driver. The Stored Job option allows you to store print jobs, and then print
them later from the control panel. The multiple-original print (mopy) function is an HP-designed
feature that produces multiple, collated copies from a single print job.
Postscript Passthrough (PS Emulation Unidriver only)
Postscript Passthrough is enabled by default, and must be enabled for most print jobs. Postscript
passthough provides additional capabilities for some software programs when printing to a postscript
driver. Options such as Watermarks, n-up and Booklet Printing might not print correctly from some
applications with Postscript Passthrough enabled, because such programs send postscript
information to the printer that cannot be controlled by the driver. Other programs might print using
these options without problems. Select Disabled and print your document again if you encounter
problems.
NOTE In some cases, disabling Postscript Passthrough may cause unexpected
application behavior.
216 4 HP PCL 6, HP PCL 5e, and HP PS emulation unidrivers for Windows
HP unidrivers for
Windows