HP LaserJet 9050 - Software Technical Reference (External)

Media types
(command string)
Tray 1 Tray 2 (500-sheet) Tray 3 (500-sheet) Tray 4 (2000-
sheet)
Duplexing unit
Bond Y Y Y Y Y
Recycled Y Y Y Y Y
Color Y Y Y Y Y
Cardstock
1
Y Y Y Y Y
Rough Y Y Y Y Y
Envelope Y N N N N
1
Tray 1 accepts cardstock between 164 g/m
2
(45 lb.) and 200 g/m
2
(53 lb.).
Custom paper sizes
The following table shows custom paper sizes that are available for the HP LaserJet 9050:
Table 7-6 Custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (multipurpose) Width 98 mm (3.86 inches) 312 mm (12.28 inches)
Height 190 mm (7.5 inches) 470.0 mm (18.5 inches)
Tray 2 (500-sheet) Width 148.0 mm (5.83 inches) 297 mm (11.69 inches)
Height 210.0 mm (8.27 inches) 432 mm (17.01 inches)
Tray 3 (500-sheet) Width 148.0 mm (5.83 inches) 297 mm (11.69 inches)
Height 210.0 mm (8.27 inches) 432 mm (17.01 inches)
Tray 4 (500-sheet) Width 182.0 mm (7.17 inches) 297 mm (11.69 inches)
Height 210.0 mm (8.26 inches) 432 mm (17.01 inches)
Duplexing unit Width 148.0 mm (5.83 inches) 312 mm (12.28 inches)
Height 210.0 mm (8.27 inches) 470 mm (18.5 inches)
Media-type commands
The PCL 5e escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the number of
characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain" has 5
letters plus 1, for a total of 6.
Table 7-7 Media-type commands
Esc& n# Wd Paper type
Esc& 6 Wd Plain
Esc& 11 Wd Preprinted
Esc& 11 Wd Letterhead
Esc& 13 Wd
Transparency
1
Table 7-5 Supported input media types (continued)
290 7 Engineering Detail
Engineering Detail