HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain Clear jams How do I? Steps to perform Clear jams in the ADF 1 Open the ADF cover. NOTE: A plastic sheet is placed on the electrostatic transfer belt to protect it during shipping. When the product is powered up for the first time, the plastic sheet is sent to the output tray. 2 Remove any jammed media. 3 Close the ADF cover. ©2008 Copyright Hewlett-Packard Development Company, L.P. 1 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Clear jams in the output bin Steps to perform 1 If jammed paper is visible in the output bin, gently pull the paper to remove it. 2 Open the right door. ©2008 Copyright Hewlett-Packard Development Company, L.P. 2 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the output bin (continued) 3 If paper has jammed as it enters the output bin, gently pull the paper to remove it. 4 Close the right door. ©2008 Copyright Hewlett-Packard Development Company, L.P. 3 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams from the fuser 1 Open the right door. 2 Lift the green handle on the transfer-access panel (1) and open the panel (2). 1 2 3 If paper is visible entering the bottom of the fuser, gently pull downward to remove it. ©2008 Copyright Hewlett-Packard Development Company, L.P. 4 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams from the fuser (continued) 4 Close the transfer-access panel. 5 Open the fuser jam access door above the fuser (1) and remove any paper that is visible (2). Then close the fuser jam access door. 6 Paper could also be jammed inside the fuser where it would not be visible. Remove the fuser to check for jammed paper inside. CAUTION: The fuser can be hot while the product is in use.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Clear jams from the fuser (continued) Steps to perform b. Rotate the blue fuser-release levers down to open them. c. Grasp the fuser handles and pull straight out to remove the fuser. CAUTION: The fuser weighs 5 kg (11 lbs). Be careful not to drop it. d. Open the two fuser jam access doors by pushing and rotating the rear door backward (1), and pulling and rotating the front door forward (2).
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Clear jams from the fuser (continued) Steps to perform e. Close both fuser jam-access doors and align the fuser with the arrows on the product. Push the fuser completely into the printer. f. Rotate the blue fuser-release levers up to lock the fuser into place. g. Push the fuser handles back to close them. ©2008 Copyright Hewlett-Packard Development Company, L.P. 7 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams from the fuser (continued) 7 Close the right door. Clear jams in the duplex area 1 Check for jammed paper inside the product. Open the right door. ©2008 Copyright Hewlett-Packard Development Company, L.P. 8 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the duplex area (continued) 2 If paper is jammed below the duplexing unit, gently pull the paper downward to remove it. 3 If paper is jammed inside the right door, gently pull the paper to remove it. 4 Lift the paper-feed cover on the inside of the right door (1). If jammed paper is present, gently pull the paper straight out to remove it (2).
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the duplex area (continued) 5 Lift the green handle on the transfer-assembly (1) and open the panel (2). 1 2 6 Gently pull the paper out of the paper path. 7 Close the transfer-access panel. ©2008 Copyright Hewlett-Packard Development Company, L.P. 10 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the duplex area (continued) 8 Close the right door. ©2008 Copyright Hewlett-Packard Development Company, L.P. 11 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Clear jams in Tray 2 and the internal paper path Steps to perform 1 Open the right door. 2 Lift the green handle on the transfer-access panel (1) and open the panel (2). 1 2 ©2008 Copyright Hewlett-Packard Development Company, L.P. 12 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in Tray 2 and the internal paper path (continued) 3 Gently pull the paper out of the paper path. 4 Close the transfer-access panel. 5 Open Tray 2 and make sure that the paper is stacked correctly. ©2008 Copyright Hewlett-Packard Development Company, L.P. 13 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in Tray 2 and the internal paper path (continued) 6 Pull the tray completely out of the product by pulling and lifting it up slightly. 7 Remove any paper from the feeder rollers inside the product. 8 Reinsert Tray 2 by aligning the side rollers and pushing it back into the product. 9 Close the tray. ©2008 Copyright Hewlett-Packard Development Company, L.P. 14 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Clear jams in Tray 2 and the internal paper path (continued) ©2008 Copyright Hewlett-Packard Development Company, L.P. Steps to perform 10 Close the right door. 15 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Clear jams in Tray 1 NOTE: Even if jammed paper is visible in Tray 1, clear the jam from the inside of the product by opening the right door. Steps to perform 1 Open the right door. NOTE: When clearing jams of long paper (11 x 17, 12 x 18, and A3), it may be necessary to cut or tear the jammed paper before opening the right door. 2 If paper is visible inside the right door, gently pull the paper downward to remove it.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in Tray 1 (continued) 4 Gently pull the paper out of the paper path. 5 Close the transfer-access panel. ©2008 Copyright Hewlett-Packard Development Company, L.P. 17 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in Tray 1 (continued) 6 Close the right door. ©2008 Copyright Hewlett-Packard Development Company, L.P. 18 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Clear jams in optional Trays 3, 4, and 5 Steps to perform 1 Open the right door. 2 If paper is visible in the paper-input area, gently pull the jammed paper up to remove it. ©2008 Copyright Hewlett-Packard Development Company, L.P. 19 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in optional Trays 3, 4, and 5 (continued) 3 Close the right door. 4 Open the lower right door. 5 Gently pull the jammed paper to remove it. ©2008 Copyright Hewlett-Packard Development Company, L.P. 20 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in optional Trays 3, 4, and 5 (continued) 6 Open the tray that is indicated in the control-panel message, and make sure that the paper is stacked correctly. 7 Close the tray. 8 Close the lower right door. ©2008 Copyright Hewlett-Packard Development Company, L.P. 21 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the optional finishing devices Clear jams in the output-accessory bridge 1 Lift the latch on the top cover of the output-accessory bridge and open the top cover. NOTE: The 3 bin stapler/stacker and booklet-maker finisher are optional accessories that can be purchased and used with this product. 2 Gently pull the jammed paper to remove it. 3 Close the top cover of the output-accessory bridge.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the optional finishing devices (continued) 4 Lift the swing guide panel in the output bin. If you can see any jammed paper, gently pull it out. Clear jams in the booklet maker 1 If the paper is visible in the booklet output bin, gently pull the paper to remove it. 2 Open the front door of the booklet maker. ©2008 Copyright Hewlett-Packard Development Company, L.P. 23 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the optional finishing devices (continued) 3 Push the upper delivery guide to the right (1), and remove any jammed paper (2). 1 2 4 Push the lower delivery guide to the right (1), and remove any jammed paper (2). 2 1 5 The positioning knob is the smaller, green dial on the right. Turn the positioning knob counterclockwise. ©2008 Copyright Hewlett-Packard Development Company, L.P. 24 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear jams in the optional finishing devices (continued) 6 The jam-release knob is the larger, green dial on the left. Push in the jam-release knob, and then turn it clockwise to move any jammed paper into the output bin. 7 Close the front door of the booklet maker. ©2008 Copyright Hewlett-Packard Development Company, L.P. 25 www.hp.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear staple jams Clear staple jams in the main stapler The HP 3-bin Stapler/Stacker and the HP Booklet maker/Finisher Accessory each have a main stapler, which is located near the top of the finishing device. 1 Open the front door of the finishing device. 2 To remove the staple cartridge, pull up on the green handle and pull out the staple cartridge.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear staple jams (continued) 4 Remove the damaged staples that protrude from the staple cartridge. Remove the entire sheet of staples that the damaged staples were attached to. 5 Close the lever at the back of the staple cartridge. Be sure that it snaps into place. 6 Reinsert the staple cartridge into the finishing device, and push down on the green handle until it snaps into place.
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear staple jams (continued) Clear staple jams in the booklet maker The booklet maker has an additional saddle stitch stapler that is below the main stapler. The saddle stitch stapler has two staple cartridges. 1 Open the front door of the booklet maker. 2 Push the upper delivery guide to the right (1), and remove any jammed paper (2).
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear staple jams (continued) 4 Grasp the handle of the blue staple cartridge unit and pull it toward you (1), then swing the staple cartridge unit into an upright position (2). 2 1 5 Check each staple cartridge for jammed staples. a. On each staple cartridge, press down on the green plastic tabs (1) while lifting the jam clearance plate (2). b. Remove any jammed staples (3).
HP Color LaserJet CM6030 and CM6040 MFP Series Manage and Maintain How do I? Steps to perform Clear staple jams (continued) 6 Pull the staple cartridge unit forward (1), and swing it downward to the original position (2). Push in on the handle to lock it into position. 1 2 7 Push the staple carriage back into the booklet maker. 8 Close the front door of the booklet maker. ©2008 Copyright Hewlett-Packard Development Company, L.P. 30 www.hp.
