HP Embedded Digital Sending - Configuring Embedded LDAP Authentication

configure - 7
Step 2: Setting up LDP
a. Open LDP by clicking on Start → Run, and typing ldp.exe; then press
Enter or click OK.
b. From the Ldp menu, select Connection → Connect.
c. In the Connect window, input 389 or 3268 as the Port Number; then
click OK.
w Port 389 is the standard LDAP port. However, it may be necessary
to use port 3268 when communicating with a Windows Global
Catalog Active Directory Server.
d. From the LDP menu, select Connection → Bind.