HP Embedded Digital Sending - PC Fax Send User Manual

ENWW Installing the MFP Send Fax driver 3
● Verifying that the MFP e-mail feature is configured (optional)
● Configuring the billing code feature (optional)
● Installing the driver
Determining if the MFP Send Fax driver is
supported by the MFP
The most current versions of the MFP firmware contain support for
the MFP Send Fax driver. To determine if your MFP firmware
supports the MFP Send Fax driver, use the following steps:
1 On the MFP control panel, press Menu.
2 Scroll to and touch FAX.
3 Scroll to and touch FAX SEND.
4 Scroll to and touch PC FAX SEND.
Note If PC FAX SEND does not appear in your MFP menu, upgrade the MFP
firmware.
5 Touch ENABLED.
6 Touch EXIT.
Upgrading the MFP firmware and downloading
the driver
To upgrade the MFP firmware and download the MFP Send Fax
driver, use the following steps:
1 View the configuration information on the MFP control panel to
determine the current firmware version.
a On the MFP control panel, press Menu.
b Touch INFORMATION.
c Touch PRINT CONFIGURATION. The configuration page
prints.
d The firmware datecode is listed in the section called Device
Information.
Note The firmware datecode is in the following format: YYYYMMDD
XX.XXX.X. The first string of numbers is the date, where YYYY
represents the year, MM represents the month, and DD represents the
date. For example, a firmware datecode that begins with 20040225
represents February 25, 2004. The second string of numbers
represents the revision number of the firmware.