HP Restricted Configuring Embedded LDAP Authentication configure
Configuring Embedded LDAP Authentication For HP product models: LaserJet 4345mfp, LaserJet 9040mfp, LaserJet 9050mfp, LaserJet 9500mfp, and Digital Sender 9200C
Legal Notice © Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft®, Windows®, and Windows NT®, are U.S. registered trademarks of Microsoft Corporation. All other products mentioned herein might be trademarks of their respective companies. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Contents Overview........................................................................................... 1 Required tool..................................................................................... 1 Step 1: Discovering the LDAP server..................................................... 5 Method 1..................................................................................... 5 Method 2.....................................................................................
Overview Configuring embedded LDAP authentication is a technical process that involves configuring the MFP to communicate with the LDAP database. This document provides step-by-step instructions on configuring this functionality. Required tool It is necessary to use Microsoft LDP to configure the MFP for embedded LDAP authentication. Microsoft LDP is a support tool that ships with the Windows Support Tools contained on the Windows OS media. It allows you to connect, bind, and query an LDAP database.
2 - configure c. Double click the SUPTOOLS.MSI file. d. Select Next at the Welcome to the Windows Support Tools Setup Wizard.
e. After reading the licensing agreement, select the I Agree radial button and click Next. f. Enter your name and organization; then click Next.
4 - configure g. Select Complete for the installation type; then click Next. h. Select Install Now to begin the installation.
i. Click Finish to complete the installation. Step 1: Discovering the LDAP server There are two key methods to discover an available LDAP server on the network. Method 1 a. Open a command window by clicking on Start → Run and typing cmd.exe in the dialog box. Then press Enter or click OK.
b. To determine which Windows Active Directory logon server you are logged onto, type the following: echo %logonserver%. This server can be used as the LDAP server. Method 2 The following command can be used to provide a list of DNS servers. n 6 - configure nslookup “name of your domain” (i.e. nslookup AMERICAS.HPQCORP.NET). In a Windows Active Directory environment, a DNS server is typically running Active Directory which contains the LDAP database.
Step 2: Setting up LDP a. Open LDP by clicking on Start → Run, and typing ldp.exe; then press Enter or click OK. b. From the Ldp menu, select Connection → Connect. c. In the Connect window, input the IP address or hostname of the LDAP server in the Server box; then input 389 or 3268 as the Port number. Click OK. w Port 389 is the standard LDAP port. However, it may be necessary to use port 3268 when communicating with a Windows Global Catalog Active Directory Server.
d. From the LDP menu, select Connection → Bind. e. In the Bind window, input username, password, and domain name; then click OK. f. On the LDP screen, find and copy the Base DN. w 8 - configure The Base DN is normally listed within “defaultNamingContext.” g. From the LDP menu, select Browse → Search. h. In the Search window, paste the Base DN into the Base Dn box. Input the LDP Filter into the Filter box.
i. w In the Search Options window, remove all entries in Attributes; then click OK. w Back in the Search window, click Run; then click Close. On the LDP screen, locate the user DN from the returned results. Copy it for use in the Embedded Web Server (EWS). w The Search Prefix begins after the individual user CN.
Hint Notice how the username is set up on the LDP screen. The username format is defined within the device user DN. This can be viewed in the LDP trace. The format is often in email address format, but can be defined in many different combinations. Step 3: Configure LDAP a. Open the EWS in a web browser. b. Select the Settings tab, and then LDAP Authentication. c. On the LDAP Authentication screen, paste the copied Search Prefix into the Bind and search Root box. d.
h. Input cn into the “Match the name entered with the LDAP attribute of” field. i. Find the device user email address in the LDP trace. Copy the attribute defining the email address. w j. Paste the attribute into the “Retrieve the device user’s email address using attribute of” box. Find the device user display name in the LDP trace. Copy the attribute defining the display name. w This is usually set as displayName.
Hint Remember how the username was set up on the LDP screen. The username is defined within the device user DN value in the LDP trace and is not in standard Windows domain account format. The format is often your entire email address, including the @xx.xx. m. The LDAP Authentication screen appears. Click Apply. Step 4: Configure the Authentication Manager 12 - configure a. From the EWS, click the Authentication Manager tab. b.
Step 5: Use the MFP control panel a. At the MFP, touch any option on the main screen. The screen displays a request for authentication. Hint Remember the username is defined within the device user DN value in the LDP trace and is often your entire email address, including the @xx.xx. b. Use the touch screen keypad to input the authentication. w Once input, click OK, and the chosen option appears; for example, the Folder screen appears.
