HP LaserJet 42X0/43X0 Series - (Multiple Language) 1500-sheet Tray Install Guide

This package contains one optional 1500-
sheet feeder that can be adjusted to letter
(LTR), legal (LGL) or A4 paper sizes.
CAUTION The 1,500-sheet feeder tray lock
must
be removed before operating the feeder.
Turn the feeder tray lock clockwise, and then
pull the lock up and out of the feeder.
Push down on the release lever and open
the door of the 1500-sheet feeder.
Close the door on the feeder.
Remove all orange tape and packing
materials. Note: Make sure that you look for
packing materials and orange tape inside of
the 1,500-sheet feeder.
Turn the printer power off (callout 1).
Disconnect all cables from the rear of the
printer (callout 2).
Note There might be additional cables
connected to the printer that are not shown
in this illustration. Make sure that you
disconnect
all
of the cables from the rear of
the printer.
3
English
English
HP LaserJet Information Engineering