HP LaserJet 4250/4350 Series - Software Technical Reference

Figure 3-13 Paper Options group box (default)
The appearance of the Paper Options group box changes when the Use Different Paper/Covers
check box is selected. For convenience, the settings in the Paper Options group box are described
in the following order:
■
Size is
■
Source Is
■
Type is
■
Custom
■
Use Different Paper/Covers
Size is
The Size is: setting is a drop-down menu that lists all of the supported media sizes.
NOTE When you move the mouse over the dimensions label, the mouse cursor changes
from an arrow to a gloved hand. Click the dimensions label to toggle between English and
metric units.
You can specify size for all of the settings in the Paper Options group box. When you set the media
size in the driver, the entire print-job output uses that media size. That is, if the print job uses Letter-
size media, any option that you select from the available Use Different Paper/Covers options must
also use Letter-size media.
Because driver settings are overridden by media-size settings in most software programs, it is
generally best to use the driver to set media size only for software programs that lack a media-size
setting, such as NotePad, or when you are producing a book or a booklet that does not require
different media sizes.
NOTE Certain software programs can override the size command and specify different
media sizes within a single document.
For information about media sizes, see the Media attributes section of this guide.
118 3 HP traditional print drivers for Windows
HP traditional drivers