HP LaserJet 4250/4350 Series - Software Technical Reference

Unit indicator labels change dynamically to indicate inches or millimeters, depending on the
measurement units the driver is currently using. To change measurement units, click the dynamic
measurement-units button (either Use Inches or Use Metric).
Custom width and height control limits
The minimum media size for the HP LaserJet 4250/4350 printer is 76.2 x 127 mm (3 x 5 inches) and
the maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size
limits for each media-handling device.
Table 3-4 PCL 6 custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (multipurpose) Width 76.2 mm (3 inches) 215.9 mm (8.5 inches)
Height 127.0 mm (5 inches) 355.6 mm (14 inches)
Tray 2 (500-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.27 inches) 355.6 mm (14 inches)
Tray 3 (500-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.27 inches) 355.6 mm (14 inches)
Tray 4 (1500-sheet) Width Custom sizes not supported Custom sizes not supported
Height Custom sizes not supported Custom sizes not supported
Duplexing unit Width Custom sizes not supported Custom sizes not supported
Height Custom sizes not supported Custom sizes not supported
Stacker, Stapler/Stacker Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.27 inches) 355.6 mm (14 inches)
Paper and envelope icons
The paper and envelope icons visually define width and height.
Dynamic measurement units
Use the dynamic measurement-units button to toggle the unit of measurement between standard
(inches) and metric (millimeters) units of measurement. The label on this button is dynamic,
depending on the measurement units that are in use. If the custom size currently shows the
measurements in inches, the button is labeled Use Millimeters. If the custom size currently shows
the measurements in millimeters, the button is labeled Use Inches. Click the button to switch
measurement-unit types.
Close
The Close button closes the Custom Paper Size dialog box according to the logic in the following
table. In all cases, any custom media sizes that are successfully saved (and not renamed or deleted)
while the dialog box is open will remain in the Size is: drop-down menu on the Paper tab. The
following table lists options that appear when you click the Close button.
HP traditional PCL 6 and PCL 5e driver features 123
HP traditional drivers