HP LaserJet 4250/4350 Series - Software Technical Reference

through the Configure tab also appear here. For more information about the Source is: setting, see
the
Source Is section of this chapter.
The Type is: drop-down menu shows all of the media types that the product supports. For more
information about the Type is: drop-down menu settings, see the Type is: in the
Type is section of
this chapter.
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image appears in the upper-right corner of all of the Document Defaults driver
tabs except the Job Storage tab. For more information about the document preview image, see the
Finishing tab features section of this chapter.
Product image
The bitmap image in the lower-right portion of the Paper tab represents the current physical
configuration of the product and corresponds to its configuration data. It should look the same as the
image that appears in the same location on the Configure tab in the printer Properties dialog box.
On the Paper tab, the product image contains hot spots where you can select a media source. When
you use the mouse to move the pointer over a hot spot, the arrow reverts to a gloved hand. The
current media source tray, whether selected from the drop-down menu or from a product image hot
spot, is highlighted on the product image. The following points are worth noting:
■ The Automatically Select setting in the Source is: drop-down menu does not have a
corresponding area to highlight in the product image. Selecting other settings in this menu
highlights the corresponding part in the product image.
■ Selecting the area that represents a tray in the image always selects the corresponding tray in
the Source is: option. Manual Feed in Tray 1, which is available from the Source is: drop-down
menu, cannot be selected by selecting the image.
■ On the Paper tab, only source trays have product image hot spots and can be highlighted.
Output tab features
The Output tab provides output options for print jobs. The controls that appear on the tab depend on
the current physical configuration of the product, either obtained automatically through bidirectional
communication or configured manually.
NOTE The product image shown in the illustration might differ from your
HP LaserJet 4250/4350 printer, depending on the model number and the installed accessory
devices.
HP traditional PCL 6 and PCL 5e driver features 129
HP traditional drivers