HP LaserJet 4250/4350 Series - Software Technical Reference

Deleting a Job Storage print job
Sometimes it is necessary to delete a print job from the product hard disk. You can do this from the
product control panel.
1 Press the S
ELECT button (the one with the check mark) to open the menus. RETRIEVE JOB is
highlighted.
2 Press the S
ELECT button.
3 Press the up and down buttons to scroll to your User Name, and then press the S
ELECT button.
4 Press the up and down buttons to scroll to the Job Name, and then press the S
ELECT button.
5 Press the up and down buttons to select DELETE.
6 If a PIN number is assigned to the job, press the up and down buttons to select the first digit of
the PIN, and then press the S
ELECT button. The number in the product control-panel display
changes to an asterisk. Repeat this step for each of the remaining three digits of the PIN number.
If no PIN number is assigned to the job, continue with step 7.
7 Press the S
ELECT button to delete the job.
The stored print job is deleted and the product returns to the READY state.
Basics tab features
The Basics tab provides options for setting the number of copies to be printed and for the orientation
of the print job. You can also use it to retrieve information about the driver.
138 3 HP traditional print drivers for Windows
HP traditional drivers