HP LaserJet 4250/4350 Series - Software Technical Reference

Figure 3-26 More Configuration Options dialog box
The More Configuration Options dialog box contains the following controls:
■ Storage group box
■ Fonts group box
■ Allow Scaling from Large Paper check box
■ Alternative letterhead mode check box
■ Ignore Application Collation check box
■ Printer Memory group box
■ Include Types in Application Source List check box
Storage
The Storage group box contains the Printer Hard Disk and Job Storage Enabled check boxes. If
your product is equipped with a hard disk drive, the Printer Hard Disk check box should be selected
and all job storage options are available. If your HP LaserJet 4250/4350 printer is not equipped with
a hard disk drive but has a minimum of 80 MB of memory (for the 4250) or 96 MB of memory (for the
4350), limited job storage options are available. When job storage is enabled, the product can store
print jobs so that you can gain access to those print jobs later at the product control panel.
Fonts
The Fonts group box contains a Font Card(s) check box and a corresponding Configure button.
Selecting the Font Card(s) check box tells the driver that a Font card is installed, and that stored
data about the fonts on the card is available. When the check box is selected, the Configure button
is enabled. Click the Configure button to open the Configure Font Card(s) dialog box. If the Font
Card(s) check box was not selected when you opened the More Configuration Options dialog box,
selecting that check box automatically opens the Configure Font Cards dialog box.
148 3 HP traditional print drivers for Windows
HP traditional drivers