HP LaserJet 4250/4350 Series - Software Technical Reference

Figure 3-27 Configure Font Cards dialog box
Use the Configure Font Cards dialog box to perform the following tasks:
■ Add up to two font cards by clicking the Add button.
■ Specify a unique font-card name.
■ Select specific font card data files that contain lists of fonts on specified cards.
■ Select one or more installed cards in the Installed Font Cards list. The list to the right (Fonts)
shows all of the fonts that are available on the selected card(s).
■ Enable or disable one or more of the selected font(s).
Complete the following steps to configure a font card:
1 Make sure that the font card is installed correctly.
2 Click Add. The Add Font Card dialog box appears.
3 Click Browse. The Font Card Files dialog box appears.
4 Find and select the appropriate Printer Cartridge Metrics (PCM) file that came with the font card.
5 Click OK.
6 If you want to, you can specify a font card name in the Add Font Card dialog box.
7 Click OK. The selected .PCM file appears in the Installed Font Cards list. Select the .PCM file
to see a list of available fonts in the Fonts list.
8 Click OK to close the Add Font Card dialog box. The fonts on the card should now be available
on the system.
NOTE When using font cards with the HP traditional PCL 6 and PCL 5e drivers: To install
screen fonts that match the font card, use the .HPB file that is specifically designed to work
with that card. If no screen fonts exist for the card, use the .PCM file that is specifically
designed to work with that card.
HP traditional PCL 6 and PCL 5e driver features 149
HP traditional drivers