HP LaserJet 4250/4350 Series - Software Technical Reference

■
Economode
■ False (default)
■ True
■
Fit to Page
■ Prompt User (default)
■ Nearest Size and Scale
■ Nearest Size and Crop
■ Letter
■ A4
Job Storage tab features
Use the Job Storage feature to store print jobs in the HP LaserJet 4250/4350 printer memory for
printing at a later time. These job-storage features are described in the following sections.
The Job Storage tab appears among the driver tabs only if Job Storage is enabled. To support job-
storage features for complex jobs, or if you often print complex graphics, print postscript (.PS)
documents, or use many downloaded fonts, HP recommends that you install additional memory,
install a hard disk, or both. Added memory also gives you more flexibility in supporting job storage
features. A minimum total memory of 80 MB (for the 4250) or 96 MB (for the 4350) is required to use
Job Storage features.
After a hard disk or additional memory is installed, the driver must be configured to reflect the
changes in the product.
Bidirectional communication is not supported in Windows 98, Windows Me, or Windows NT 4.0, the
operating environments that support the PS Emulation Driver. The driver must therefore be updated
manually.
To configure the driver manually after installing a hard disk or additional memory, follow these steps:
1 Click Start, select Settings, and then click Printers.
2 Right-click the product name, click Properties, and then click the Device Settings tab.
3 If additional memory has been installed, select Printer Memory: under Installable Options, and
then select the option that matches the total amount of memory installed.
4 If a hard disk has been installed, select Printer Hard Disk: under Installable Options, and then
select Installed in the Change 'Printer Hard Disk' Setting dialog box that appears.
5 Click OK to make the product hard disk and job-storage features available.
NOTE You can disable Job Storage while leaving the product hard disk enabled. To disable
Job Storage, click Start, select Settings, and then click Printers. Right-click the product
name, click Properties, click the Device Settings tab, select Job Storage:, and then select
Disabled in the Change 'Job Storage' Setting dialog box that appears. When Job Storage is
disabled, the Job Storage driver tab is not visible.
160 3 HP traditional print drivers for Windows
HP traditional drivers