HP LaserJet 4250/4350 Series - Software Technical Reference

Name
Use the Name text box to type a new name for a custom media size.
The name that appears in the Name text box is one of three things, depending on the following
conditions:
■ If a saved custom media size has been selected from the drop-down menu on the Paper/Quality
tab, then the Name drop-down menu shows the name of the selected custom media size.
■ If a standard media size has been selected on the Paper/Quality tab, then the Name drop-down
menu shows the default name of "Custom."
■ If a new name has been typed into the Name text box for the purpose of saving a new size or
renaming an existing size, then that new name will remain in the text box until the new size is
saved or the dialog box is closed.
If you type a new name into the Name text box, but then do not click the Save button, you should be
able to change the width and height values without losing the name. However, if you close the dialog
box without clicking the Save button, any unsaved name or size values are lost without warning.
Paper Size
The width and height values can be changed by typing numeric strings into the edit boxes in the
Paper Size group box.
Any entry that is greater than the maximum limits of the width and height control is rounded down to
the maximum valid entry, while any entry that is smaller than the minimum limits of the width and
height control is rounded up to the minimum valid entry.
Any non-numerical entry reverts to the last valid entry. Width and height entries are validated when
the focus has changed.
The resolution of the control is two decimal places for both millimeters and inches.
Units
To change measurement units, select one of the radio buttons in the Units group box (either Inches
or Millimeters).
Custom width and height control limits
The minimum media size for the HP LaserJet 4250/4350 printer is 76.2 x 127 mm (3 x 5 inches) and
the maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size
limits for each media-handling device.
Table 4-2 PCL 6 custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (multipurpose) Width 76.2 mm (3 inches) 215.9 mm (8.5 inches)
Height 127.0 mm (5 inches) 355.6 mm (14 inches)
Tray 2 (500-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.27 inches) 355.6 mm (14 inches)
Tray 3 (500-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
HP PCL 6, HP PCL 5e, and PS emulation unidriver features 187
HP unidrivers