HP LaserJet 4250/4350 Series - Software Technical Reference

Figure 4-23 Device Settings tab for thePS Emulation Unidriver
The postscript configuration options are described in the following sections.
Available PostScript Memory
This control specifies the amount of available postscript memory and provides a spin box for
changing this value. The available postscript memory is a subset of the product total physical
memory. It is usually best to set the postscript memory to match what is shown on the configuration
page. To print a configuration page from the control panel, press the Select button (the one with the
check mark) to open the menus. Next, press the up and down buttons to scroll to INFORMATION,
and then press the S
ELECT button. Next, press the up and down buttons to scroll to PRINT
CONFIGURATION, and then press the S
ELECT button.
Output Protocol
This control specifies the protocol that the product uses for print jobs. The following options are
available:
■ ASCII (default)
■ TBCP
■ Binary
When you click ASCII, data is sent in ASCII format (7-bit), which might take longer to print but can be
sent through any I/O channel, such as a serial, parallel, or network port.
222 4 HP PCL 6, HP PCL 5e, and HP PS 3 emulation unidrivers for Windows
HP unidrivers