HP LaserJet 4250/4350 Series - Software Technical Reference

Table 7-6 PCL 6 custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (multipurpose) Width 76.2 mm (3 inches) 215.9 mm (8.5 inches)
Height 127.0 mm (5 inches) 355.6 mm (14 inches)
Tray 2 (500-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.27 inches) 355.6 mm (14 inches)
Tray 3 (500-sheet) Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.27 inches) 355.6 mm (14 inches)
Tray 4 (1500-sheet) Width Custom sizes not supported Custom sizes not supported
Height Custom sizes not supported Custom sizes not supported
Duplexing unit Width Custom sizes not supported Custom sizes not supported
Height Custom sizes not supported Custom sizes not supported
Stacker, Stapler/Stacker Width 148.0 mm (5.83 inches) 215.9 mm (8.5 inches)
Height 210.0 mm (8.27 inches) 355.6 mm (14 inches)
Paper type commands
The PCL 5e escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the number of
characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain" has 5
letters plus 1, for a total of 6.
In order for the command to work correctly, at least one of the media trays in the product must be
configured at the control panel for the paper type that is used in the command.
NOTE Some paper type options that are listed in the following table might not be defined in
the print driver.
Table 7-7 Paper-type commands
Esc& n# Wd Paper type
Esc& 6 Wd Plain
Esc& 11 Wd Preprinted
Esc& 11 Wd Letterhead
Esc& 13 Wd
Transparency
1
Esc& 11 Wd Prepunched
Esc& 7 Wd Labels
Esc& 5 Wd Bond
Esc& 9 Wd Recycled
Esc& 6 Wd Color
Esc& 11 Wd
Cardstock
2
Media attributes 299
Engineering detail