HP LaserJet 42X0/43X0 Series - (Multiple Language) Stapler-Stacker Install Guide

This package contains either a 500-sheet
stacker (Q2442B) or a 500-sheet stapler/
stacker (Q2443B). The steps in this guide
apply to both models.
Open the rear output bin (callout 1).
Remove the accessory cover located at the
top-rear of the printer (callout 2). Close the
rear output bin.
Note Keep the accessory cover, which must
be reinstalled if the stacker is removed from
the printer.
Remove the orange packing tape and all
packing material from the stacker or stapler/
stacker.
Firmly gripping the stacker or stapler/
stacker, insert the metal legs into the slots at
the top-rear of the printer.
Turn the printer power off.
Make sure that the stacker or stapler/
stacker is completely seated.
3
English
English
HP LaserJet information engineering