HP Designjet 90 Printer Series Quick Reference Guide

HP Designjet 30/90/130 – Kurzübersicht

Deutsch

Problem: Ein Druckkopfsymbol blinkt (Fortsetzung)

3. Pull the printhead cover up and towards you, so that the hook at the front

unlatches itself, and then push the whole cover back so that the printheads

are exposed.

4. Remove the failed printhead by lifting the small handle at the top front and

using it to pull the printhead vertically up and out of the printer.

5. Ensure that no tape is covering the printhead contacts.

6. Gently wipe the printhead contacts with a clean, soft, lint-free cloth.