Getting Started Guide

9
Print your first photo
Imprimez votre première photo
8
English
1. Place a few sheets of HP Advanced Photo
Paper in the input tray with the glossy side
facing the front of the printer and adjust
the paper-width guide.
2. If your camera is on, turn it off by pressing
the ON/OFF button.
3. Place the camera into the camera dock on
the printer.
4. Press
on the printer control panel to
browse to the image you want to print.
5. Press
on the printer to print your first
image. Press again to print additional
copies of the image.
6. Repeat steps 4-5 if you wish to print other
images.
Important! For best results, do not let photo
prints stack in the output tray. Your photos
are instantly dry, however HP recommends
you leave the printed surface of your photos
exposed to the air for 5-10 minutes after
printing to allow the colors to fully develop.
Note: Refer to the printer User Guide for
additional print options.
buttons
Flèche
Print button
Bouton Imprimer
Français
1. Placez quelques feuilles de papier
photo avancé HP dans le bac d'entrée,
face brillante orientée vers l'avant de
l'imprimante, et réglez le guide de
largeur.
2. Si votre appareil photo est sous tension,
appuyez sur le bouton Marche/Arrêt.
3. Connectez l'appareil photo à la station
d'accueil.
4. Appuyez sur la flèche
du panneau
de commande pour rechercher l'image à
imprimer.
5. Appuyez sur le bouton
de
l'imprimante pour tirer votre première
image. Pour imprimer d'autres
exemplaires de l'image, appuyez de
nouveau sur autant de fois que
nécessaire.
6. Pour imprimer d'autres images, répétez
les étapes 4 à 5.
Important ! Pour obtenir de meilleurs
résultats, ne laissez pas vos impressions
empilées dans le bac de sortie. Vos photos
sèchent instantanément. Cependant, nous
vous recommandons de laisser la surface
imprimée de vos photos à l'air libre pendant
5 à 10 minutes et d'obtenir ainsi des
couleurs optimales.
Remarque : pour plus d'informations sur
les options de tirage, consultez le guide de
l'utilisateur de l'imprimante.