HP Color LaserJet 4700 - Software Technical Reference (External)

●

Last Page

●

Back Cover

NOTE You must use the same size of media for the entire print job. All Use Different Paper/

Covers options use the size that you selected in the First Page settings and the Size is: driver

setting becomes unavailable for all of the other Use Different Paper/Covers options. Therefore,

the First Page settings are described first in the following sections.

When you change the type and source of the media and covers, the settings you select remain

configured until you close the software program.

Each option for the Use Different Paper/Covers setting is described in the following sections.

Front Cover

Use the Front Cover options to include a blank or preprinted front cover on a document, or to include

a front cover from a source tray that is different from the one that is used for the remainder of the

document.

The following figure shows the Front Cover setting and options.

Figure 3-14 Front Cover options

The Front Cover options are as follows:

●

Add a Blank or Preprinted Cover check box

●

Source is: drop-down menu

●

Type is: drop-down menu

When you select Front Cover, you must also select the Add a Blank or Preprinted Cover check box

to enable the setting. When you select this check box, the Source is: and Type is: drop-down menus

become available and a check mark appears next to the Front Cover option.

The Source is: setting specifies the source tray to use for adding a front cover to the document. The

list of source trays depends on the printer accessories. Any optional media trays that are installed

through the Configure tab also appear here. For more information about the Source is: setting, see