HP Color LaserJet 4700 - Software Technical Reference (External)

Clicking Custom page 1, Custom page 2, or Custom page 3 enables the Custom button at the bottom
of the Paper tab. Clicking Custom opens the Custom-defined size dialog box that you can use to
define a custom paper size.
The following figure shows the Custom-defined size dialog box.
Figure 3-29 Custom-designed size dialog box
The following controls appear on the Custom-defined size dialog box:
●
Paper name text box. Use this option to type a name for this custom paper size. You can define
up to three custom sizes at one time.
●
Width spin box. Use this control to specify the width for this custom paper size.
●
Length spin box. Use this control to specify the length for this custom paper size.
●
Units group box. Click Inches or Millimeters to specify the measurement unit for this custom paper
size.
●
Transverse check box. Clicking this check box rotates the document 90° when printing on a roll-
fed device. Depending on the size of the printed page, you might save paper if you rotate the page
when printing.
●
Restore defaults button. Click this button to restore the settings in the Custom-defined size dialog
box to their original values.
Layout
Use the settings in this group box to specify how many pages of the document print on a single piece
of paper. For example, clicking 1 up prints one page of the document on each sheet of paper. Clicking
2 up prints two pages on each sheet of paper, dividing the paper in half. The Layout group box values
are ignored if you print an EPS file.
The following options are available in the Layout group box:
●
1 up
●
2 up
●
4 up
ENWW HP Traditional Postscript 3 Emulation Driver features 135
HP traditional print
drivers for Windows