HP Color LaserJet 4700 - Software Technical Reference (External)

NOTE The Job Storage tab appears among the driver tabs only if Job Storage is enabled.
You can disable Job Storage while leaving the printer hard disk enabled. To disable Job Storage, follow
these steps:
1. click Start.
2. Select Settings.
3. Click Printers (Windows 2000) or Printers and Faxes (Windows XP Professional and Windows
Server 2003) or Printers and Other Hardware Devices (Windows XP Home).
4. Right-click the product name.
5. click Properties.
6. click the Device Settings tab.
7. select Job Storage:.
8. and then select Disabled in the Change 'Job Storage' Setting dialog box that appears.
NOTE When Job Storage is disabled, the Job Storage driver tab is not visible.
If Job Storage is enabled (without installing a hard disk but with at least 288 MB of total memory),
two Job Storage Mode settings are available on the Job Storage tab:
●
Proof and Hold
●
Private Job
Two additional Job Storage Mode settings become available on the Job Storage tab if a hard disk is
installed:
●
Quick Copy
●
Stored Job
The following figure shows the Job Storage tab.
206 Chapter 4 HP PCL 6, PCL 5, and PS emulation unidrivers for Windows ENWW
HP unidrivers for
Windows