HP Color LaserJet 4700 - Software Technical Reference (External)

Job Timeout
This control specifies how long the document can take to get from the computer to the product before
the product stops trying to print the document. If you specify 0 seconds, the product continues trying
to print indefinitely. The default setting is 0 seconds. You can use the spin box to change this value to
a maximum of 32,767 seconds.
Wait Timeout
This control specifies how long the product waits to get more postscript information from the computer.
After the specified time passes, the product stops trying to print the document and prints an error
message. If you are trying to print a very complicated document, you might want to increase this value.
If you specify 0 seconds, the product waits indefinitely. The default setting is 300 seconds. You can
use the spin box to change this value to a maximum of 32,767 seconds.
Minimum Font Size to Download as Outline
This control specifies the minimum font size (in pixels) for which the driver downloads TrueType fonts
as outline (Type 1) fonts. A font smaller than the minimum setting is downloaded as a bitmap (Type 3)
font. Use this option to fine-tune the Automatic setting for the TrueType Font Download option on the
Advanced tab in Document Defaults. The default setting is 100 pixels. You can use the spin box to
change this value to a maximum of 32,767 pixels.
Maximum Font Size to Download as Outline
This control specifies the maximum font size (in pixels) for which the driver will download TrueType fonts
as bitmap (Type 3) fonts. A font larger than the maximum setting will be downloaded as an outline (Type
1) font. Use this option to fine-tune the Automatic setting or override the Send TrueType as Bitmap
setting for the TrueType Font Download option on the Advanced tab in Document Defaults. The
default setting is 600 pixels. You can use the spin box to change this value to a maximum of 32,767
pixels.
Installable Options
This section provides information to configure the printing options that you can install for the
HP Color LaserJet 4700. The following controls are available:
●
Automatic Configuration (Off by default)
●
Tray 3
●
Tray 4
●
Tray 5
●
Tray 6
●
Accessory Output Bin
●
Duplex Unit (for 2-Sided Printing)
●
Allow Manual Duplexing
●
Accessory Output Bin
●
Printer Memory
●
Printer Hard Disk
226 Chapter 4 HP PCL 6, PCL 5, and PS emulation unidrivers for Windows ENWW
HP unidrivers for
Windows