HP Color LaserJet 4700 - Software Technical Reference (External)

NOTE The HP Color LaserJet 4700 does not support infrared connections.
If you select Connected directly to this computer (a "direct connection" using a parallel cable or USB
2.0 cable), and then click Next, the Connector Type dialog box opens. This is the default option.
NOTE Select the Connected directly to this computer option if a network port has already
been created for your product (which could occur, for instance, if the product has been previously
installed); the installer treats this port as if it is a local direct connection.
The Connector Type dialog box is shown in the following figure.
Figure 5-9 Connector Type dialog box
NOTE The printing-system software should be installed before the HP Color LaserJet 4700
printer is connected to the computer through a parallel or USB connection and turned on. During
the installation process, you will be prompted by the software to connect the device during
installation.
Select any option and click Next to open the Installation Type dialog box. To continue with the default
installation sequence, see
Figure 5-22 Installation Type dialog box.
If you are installing the HP Color LaserJet 4700 printer over the network, select Connected via the
network in the Printer Connection dialog box.
For a network installation, the HP Color LaserJet 4700 printer must be connected to the network and
turned on before the printing-system software is installed so that the software can detect the printer.
Click Next to continue. The Searching dialog box opens, as shown in the following figure.
246 Chapter 5 Installing Windows printing-system components ENWW
Installation in Windows