HP Color LaserJet 4700 - Software Technical Reference (External)

If you click the Change TCP/IP Settings button, the Confirm Change Setting dialog box opens, as
shown in the following figure.
WARNING! When you change the TCP/IP configuration by using the Change TCP/IP
Settings button, you change the actual settings in the product Jetdirect card. You should make
changes to these settings only with the advice of your network administrator.
Figure 5-15 Confirm Changing Setting dialog box
If you click No, the Installation Type dialog box opens (see
Figure 5-22 Installation Type dialog box).
If you click Yes, the Set Network Protocol dialog box opens (see
Figure 5-21 Set Network Protocol
dialog box).
The Check Cable Connection dialog box is shown in the following figure.
252 Chapter 5 Installing Windows printing-system components ENWW
Installation in Windows