HP Color LaserJet 4700 - Software Technical Reference (External)

Click Next to proceed with the installation. The Installation Type dialog box opens (see Figure 5-22
Installation Type dialog box).
NOTE If you selected Yes on the Confirm Changing Setting dialog box (see Figure 5-20
Confirm Settings dialog box), the Set Network Protocol dialog box opens, as shown in the
following figure.
Figure 5-21 Set Network Protocol dialog box
If you click Change Settings... the text boxes become active and the text in the Change Settings...
button changes to Suggest Settings.... Type a different IP Address, Subnet Mask, or Gateway address
and then click Next to open the Confirm Settings dialog box (see
Figure 5-20 Confirm Settings dialog
box).
If you clear the Use Default Port Name check box and click Next, the Set Port Name dialog box opens
(see
Figure 5-19 Set Port Name dialog box).
When you click Next on the Set Network Protocol dialog box, the Installation Type dialog box opens,
as shown in the following figure.
256 Chapter 5 Installing Windows printing-system components ENWW
Installation in Windows