HP Color LaserJet 4700 - Software Technical Reference (External)

Select one of the following options in the Configuration drop-down menu:
●
DHCP
●
BootP
●
Manual
You can also use this screen to modify the following settings:
●
Host Name
●
IP Address
●
Subnet Mask
●
Default Gateway
To view and change other network settings, click the Additional Network Settings button.
If a user name and password have been set, you might need to obtain them from your IT administrator.
For information about logging on through a password-protected system, see {Xref Error! Target does
not exist.} or consult the HP Embedded Web Server User Guide.
The HP EWS opens to the Network Settings screen. For information about this screen, see
Networking
tab.
Rendezvous Setting
Select Rendezvous Setting to open the Rendezvous Setting screen. Rendezvous is enabled by
default.
To disable Rendezvous, clear the Enable Rendezvous check box and click Apply Now.
Figure 2-26 Rendezvous screen
64 Chapter 2 Software description ENWW
Software description