HP LaserJet - Network Install Guide (multiple language)

ManualsBrandsHP ManualsDesktopsHP Color LaserJet 4700 Printer

ENWW 3

EnglishEnglish

3. Select the language you would like the installer to

display, and accept the License Agreement.

4. On the Printer Connection screen, select

Connected via the network.

5. On the Confirm Settings screen, verify the printer

settings.

Note To manually change the IP address of

the printer, select Change Settings on

the Confirm Settings screen and follow

the prompts.

6. On the Installation Type screen, select Typical

Installation to install the typical software. To

install the minimum set of drivers and software,

select Minimum Installation. If you want to select

the software to be installed, select Custom

Installation.

7. On the Printer Name screen, assign the printer a

name to be used in the Printers folder.

8. On the Printer Sharing screen, click the Printer

Sharing button and follow the prompts.

9. If you are sharing the printer with other PCs that

are running operating systems different than the

PC you are using, add these drivers on the Client

Driver Support screen after the printer is installed.

• To add drivers for sharing with different

operating systems, highlight the printer and

select File, Properties. On the Sharing tab,

select Additional Drivers and point to the

desired drivers.

10. For Windows 2000 and XP, you can provide

location and descriptive information if desired.

11. On the Ready to Install screen, select Install and

allow the installation to complete.

3 - Client-server printing via

direct-connected shared printer

Server installation

The printer is connected directly to a PC using a USB

or parallel cable, and is shared with other PCs or

clients on the network.

● Recommended for printers that do not have a

network connection.

● Requires the printer to be directly connected to a

PC with either a parallel or USB cable.

● Installation overview:

• Hardware setup - plug the printer directly into

the PC with a parallel or USB cable.

• Run the CD, which came with the printer, on

the server PC to enable printing.

● Information required during software setup -

decide on a printer share name.

Installation steps:

1. Insert the CD that came with the printer. The

software installer should start without assistance.

If it does not, browse to setup.exe in the root

directory of the CD and double-click on it.

2. Select the language you would like the installer to

display, and accept the License Agreement.

3. On the Printer Connection screen, select

Connected directly to this computer.

4. On the Connector Type screen, select the type of

cable used to connect the printer.